M6 Helicoil Drill Size and Insert Lengths

Thread Inserts

For an M6 wire thread insert, drill 6.3 mm (0.2480 in), typical and tap with an M6 STI tap, pitch 1 mm (0.0394 in). Standard insert lengths are 6 mm (0.236 in), 9 mm (0.354 in), 12 mm (0.472 in), 15 mm (0.591 in) and 18 mm (0.709 in).

⌀Tap drill for STI tap (typical)
6.3 mm0.2480 in0.2480 in6.3 mm
PPitch
1 mm0.0394 in0.0394 in1 mm
1.5dInsert length 1.5d
9 mm0.354 in0.354 in9 mm
2dInsert length 2d
12 mm0.472 in0.472 in12 mm

Drawing

⌀6.3 mm⌀0.2480 in1.5d 9 mm1.5d 0.354 inTakes a standard M6 screw after installation
Section through an STI-tapped blind hole with a 1.5d insertDrawn to scale · Dimensions in mmDimensions in inches

M6 specifications

PPitch1 mm0.0394 in
⌀Tap drill for STI tap (typical)6.3 mm0.2480 in
1dInsert length 1d6 mm0.236 in
1.5dInsert length 1.5d9 mm0.354 in
2dInsert length 2d12 mm0.472 in
2.5dInsert length 2.5d15 mm0.591 in
3dInsert length 3d18 mm0.709 in

M6 is the most common repair size. 6.3 mm is the usual drill; some kits specify 6.4 mm, so use the drill in your kit.

M6 in other charts

All Thread Inserts sizes

Compare all 13 sizes in the Thread Inserts chart →

Sources

  1. DIN 8140-1 / ISO 13431: Wire thread inserts for ISO metric screw threads
  2. Böllhoff: HELICOIL thread inserts, technical catalogue (STI tap drills, nominal lengths)
  3. Albany County Fasteners: HeliCoil thread repair sizing chart
  4. AmesWeb: Helicoil tap sizes (STI)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.