M8 Helicoil Drill Size and Insert Lengths

Thread Inserts

For an M8 wire thread insert, drill 8.4 mm (0.3307 in), typical and tap with an M8 STI tap, pitch 1.25 mm (0.0492 in). Standard insert lengths are 8 mm (0.315 in), 12 mm (0.472 in), 16 mm (0.630 in), 20 mm (0.787 in) and 24 mm (0.945 in).

⌀Tap drill for STI tap (typical)
8.4 mm0.3307 in0.3307 in8.4 mm
PPitch
1.25 mm0.0492 in0.0492 in1.25 mm
1.5dInsert length 1.5d
12 mm0.472 in0.472 in12 mm
2dInsert length 2d
16 mm0.630 in0.630 in16 mm

Drawing

⌀8.4 mm⌀0.3307 in1.5d 12 mm1.5d 0.472 inTakes a standard M8 screw after installation
Section through an STI-tapped blind hole with a 1.5d insertDrawn to scale · Dimensions in mmDimensions in inches

M8 specifications

PPitch1.25 mm0.0492 in
⌀Tap drill for STI tap (typical)8.4 mm0.3307 in
1dInsert length 1d8 mm0.315 in
1.5dInsert length 1.5d12 mm0.472 in
2dInsert length 2d16 mm0.630 in
2.5dInsert length 2.5d20 mm0.787 in
3dInsert length 3d24 mm0.945 in

M8 × 1.25: 8.4 mm drill, STI tap M8 × 1.25. For spark plug threads (M14 × 1.25 and similar fine threads) use the fine-pitch kits, not the coarse ones.

M8 in other charts

All Thread Inserts sizes

Compare all 13 sizes in the Thread Inserts chart →

Sources

  1. DIN 8140-1 / ISO 13431: Wire thread inserts for ISO metric screw threads
  2. Böllhoff: HELICOIL thread inserts, technical catalogue (STI tap drills, nominal lengths)
  3. Albany County Fasteners: HeliCoil thread repair sizing chart
  4. AmesWeb: Helicoil tap sizes (STI)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.