Thrust Ball Bearing Size Chart

A thrust ball bearing is a shaft washer, a ball and cage assembly and a housing washer. It carries axial load only. Sizes follow ISO 104: a 51205 is 25 mm bore, 47 mm outside diameter and 15 mm high.

88 sizesChecked 2026-11-154 sources

Size chartTap a size for its drawing and full specs

88 of 88
BearingdBore (shaft washer)mminDOutside diametermminHHeightmmin
511 series (extra light)
51100100.394240.94590.354
51101120.472261.02490.354
51102150.591281.10290.354
51103170.669301.18190.354
51104200.787351.378100.394
51105250.984421.654110.433
51106301.181471.850110.433
51107351.378522.047120.472
51108401.575602.362130.512
51109451.772652.559140.551
51110501.969702.756140.551
51111552.165783.071160.630
51112602.362853.346170.669
51113652.559903.543180.709
51114702.756953.740180.709
51115752.9531003.937190.748
51116803.1501054.134190.748
51117853.3461104.331190.748
51118903.5431204.724220.866
511201003.9371355.315250.984
512 series (light)
51200100.394261.024110.433
51201120.472281.102110.433
51202150.591321.260120.472
51203170.669351.378120.472
51204200.787401.575140.551
51205250.984471.850150.591
51206301.181522.047160.630
51207351.378622.441180.709
51208401.575682.677190.748
51209451.772732.874200.787
51210501.969783.071220.866
51211552.165903.543250.984
51212602.362953.740261.024
51213652.5591003.937271.063
51214702.7561054.134271.063
51215752.9531104.331271.063
51216803.1501154.528281.102
51217853.3461254.921311.220
51218903.5431355.315351.378
512201003.9371505.906381.496
513 series (medium)
51304200.787471.850180.709
51305250.984522.047180.709
51306301.181602.362210.827
51307351.378682.677240.945
51308401.575783.071261.024
51309451.772853.346281.102
51310501.969953.740311.220
51311552.1651054.134351.378
51312602.3621104.331351.378
51313652.5591154.528361.417
51314702.7561254.921401.575
51315752.9531355.315441.732
51316803.1501405.512441.732
51317853.3461505.906491.929
51318903.5431556.102501.969
513201003.9371706.693552.165
514 series (heavy)
51405250.984602.362240.945
51406301.181702.756281.102
51407351.378803.150321.260
51408401.575903.543361.417
51409451.7721003.937391.535
51410501.9691104.331431.693
51411552.1651204.724481.890
51412602.3621305.118512.008
51413652.5591405.512562.205
51414702.7561505.906602.362
51415752.9531606.299652.559
51416803.1501706.693682.677
51417853.3461807.087722.835
51418903.5431907.480773.031
514201003.9372108.268853.346
522 series (double direction)
52202100.394321.260220.866
52204150.591401.575261.024
52205200.787471.850281.102
52206250.984522.047291.142
52207301.181622.441341.339
52208301.181682.677361.417
52209351.378732.874371.457
52210401.575783.071391.535
52211451.772903.543451.772
52212501.969953.740461.811
52213552.1651003.937471.850
52214552.1651054.134471.850
52215602.3621104.331471.850
52216652.5591154.528481.890
52217702.7561254.921552.165
52218752.9531355.315622.441
52220853.3461505.906672.638

How to read a thrust ball bearing number

51205: 5 = thrust ball bearing, 1 = height series, 2 = diameter series (0 = 511 extra light … 4 = 514 heavy), 05 = bore code (× 5 = 25 mm; 00/01/02/03 = 10/12/15/17 mm). Double direction bearings are 522xx; there the bore code gives the size of the matching single direction bearing, and the central shaft washer has a smaller bore: 52205 has a 20 mm bore.

Old Russian / GOST numbers drop the 5: 8205 = 51205, 8105 = 51105. Suffixes M / MP = brass cage, TN9 = polyamide cage. Bearings with a sphered housing washer (532xx, with or without seat washer U2xx) can compensate for misalignment and are taller.

The shaft washer (tight fit on the shaft) has bore d; the housing washer has the outside diameter D and a slightly larger bore so it clears the shaft. Fit them the right way round: the washer with the smaller bore goes on the rotating shaft.

About Thrust Ball Bearings

Thrust ball bearings take axial load in one direction (single direction) or both (double direction) but no radial load at all; another bearing must guide the shaft radially. They suit low to medium speeds (at high speed the balls are pushed outward and skid) and appear in turntables, crane hooks, vertical pumps, swivels, clutch release units and machine-tool tailstocks.

They need a minimum axial load to keep the balls rolling, often provided by springs. Washers must sit flat against square shoulders; tilt shortens life quickly, which is why the sphered-washer versions exist.

Boundary dimensions d, D and H are fixed by ISO 104 and interchangeable between makers. The washer diameters (shaft washer OD, housing washer bore) vary slightly between brands, so check them when the bearing runs close to a shoulder or a housing bore.

Single or double direction

A double direction bearing (522) has one central shaft washer and two housing washers with two ball sets. It locates a shaft in both directions in one unit: 52206 replaces two 51206-sized bearings with a spacer and is 29 mm high instead of two × 16 mm.

Questions

What size is a 51205 thrust bearing?

25 mm bore, 47 mm outside diameter, 15 mm high (0.984 × 1.850 × 0.591 in).

Which washer goes on the shaft?

The washer with the smaller bore (exactly d) is the shaft washer and turns with the shaft. The housing washer has a slightly larger bore and sits in the housing.

Can a thrust ball bearing take radial load?

No. It only carries axial load; the shaft needs a separate radial bearing.

What is an 8205 bearing?

8205 is the Russian (GOST) number for a 51205: 25 × 47 × 15 mm single direction thrust ball bearing.

Sources

  1. ISO 104:2015, Rolling bearings, thrust bearings, boundary dimensions, general plan
  2. DIN 711 / DIN 715: Thrust ball bearings, single direction / double direction
  3. SKF: Thrust ball bearings, product tables (511, 512, 513, 514, 522)
  4. NSK / NTN: Thrust ball bearing product pages (51100 … 52220)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.