1-1/8″ Thread: TPI, Tap Drill and Clearance Hole
UNC / UNF Threads
The 1-1/8″ unified thread has a major diameter of 1.1250 in (28.58 mm). Coarse thread (UNC): 7 TPI (3.629 mm), tap drill 63/64″. Fine thread (UNF): 12 TPI (2.117 mm), tap drill 1-3/64″. Clearance drills, basic pitch and minor diameters and the nearest metric sizes are below.
- dMajor diameter
- 28.58 mm1.1250 in1.1250 in28.58 mm
- UNC threads per inch
- 3.629 mm7 TPI7 TPI3.629 mm
- UNC tap drill
- 63/64″
- UNF threads per inch
- 2.117 mm12 TPI12 TPI2.117 mm
Drawing
1-1/8″ specifications
| dMajor diameter | 1.1250 in28.58 mm |
|---|---|
| UNC threads per inch | 7 TPI3.629 mm |
| UNC tap drill | 63/64″ |
| UNC tap drill (decimal) | 0.9844 in25.00 mm |
| UNF threads per inch | 12 TPI2.117 mm |
| UNF tap drill | 1-3/64″ |
| UNF tap drill (decimal) | 1.0469 in26.59 mm |
| UNEF threads per inch | 18 TPI1.411 mm |
| d₂Pitch diameter (basic) | 1.0322 in26.218 mm |
| D₁Minor diameter, nut (basic) | 0.9704 in24.648 mm |
Also known as
1-1/8-71-1/8"-71-1/8-121-1/8"-12
Nearest metric thread sizes
All UNC / UNF Threads sizes
Sources
- ASME B1.1-2019: Unified inch screw threads (UN, UNR and UNJ thread forms)
- Machinery's Handbook, 31st ed.: Unified thread series and tap drill sizes
- Little Machine Shop: Tap and clearance drill sizes
- Starrett: Tap drill sizes, close and free fit clearance drills
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.