7/16″ Thread: TPI, Tap Drill and Clearance Hole

UNC / UNF Threads

The 7/16″ unified thread has a major diameter of 0.4375 in (11.11 mm). Coarse thread (UNC): 14 TPI (1.814 mm), tap drill U. Fine thread (UNF): 20 TPI (1.270 mm), tap drill 25/64″. Clearance drills, basic pitch and minor diameters and the nearest metric sizes are below.

dMajor diameter
11.11 mm0.4375 in0.4375 in11.11 mm
UNC threads per inch
1.814 mm14 TPI14 TPI1.814 mm
UNC tap drill
U
UNF threads per inch
1.270 mm20 TPI20 TPI1.270 mm

Drawing

⌀11.11 mm⌀0.4375 in⌀9.149 mm⌀0.3602 in1.814 mm14 TPI
1.814 mm14 TPI0.983 mm0.0387 inH₁60°
Side view at true pitch (coarse thread); basic 60° profile enlarged.Drawn to scale · Dimensions in mmDimensions in inches

7/16″ specifications

dMajor diameter0.4375 in11.11 mm
UNC threads per inch14 TPI1.814 mm
UNC tap drillU
UNC tap drill (decimal)0.3680 in9.35 mm
UNF threads per inch20 TPI1.270 mm
UNF tap drill25/64″
UNF tap drill (decimal)0.3906 in9.92 mm
UNEF threads per inch28 TPI0.907 mm
Clearance drill, close fit29/64″
Clearance drill, close (decimal)0.4531 in11.51 mm
Clearance drill, free fit15/32″
Clearance drill, free (decimal)0.4688 in11.91 mm
d₂Pitch diameter (basic)0.3911 in9.934 mm
D₁Minor diameter, nut (basic)0.3602 in9.149 mm

7/16-14 is often skipped in kits but is standard in automotive and agricultural equipment; U drill (0.368″) for UNC, 25/64″ for UNF.

Also known as

7/16-147/16"-147/16-207/16"-20

Tap and clearance drills for 7/16″

Nearest metric thread sizes

All UNC / UNF Threads sizes

Compare all 24 sizes in the UNC / UNF Threads chart →

Sources

  1. ASME B1.1-2019: Unified inch screw threads (UN, UNR and UNJ thread forms)
  2. Machinery's Handbook, 31st ed.: Unified thread series and tap drill sizes
  3. Little Machine Shop: Tap and clearance drill sizes
  4. Starrett: Tap drill sizes, close and free fit clearance drills

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.