#12 Thread: TPI, Tap Drill and Clearance Hole
UNC / UNF Threads
The #12 unified thread has a major diameter of 0.2160 in (5.49 mm). Coarse thread (UNC): 24 TPI (1.058 mm), tap drill #16. Fine thread (UNF): 28 TPI (0.907 mm), tap drill #14. Clearance drills, basic pitch and minor diameters and the nearest metric sizes are below.
- dMajor diameter
- 5.49 mm0.2160 in0.2160 in5.49 mm
- UNC threads per inch
- 1.058 mm24 TPI24 TPI1.058 mm
- UNC tap drill
- #16
- UNF threads per inch
- 0.907 mm28 TPI28 TPI0.907 mm
Drawing
#12 specifications
| dMajor diameter | 0.2160 in5.49 mm |
|---|---|
| UNC threads per inch | 24 TPI1.058 mm |
| UNC tap drill | #16 |
| UNC tap drill (decimal) | 0.1770 in4.50 mm |
| UNF threads per inch | 28 TPI0.907 mm |
| UNF tap drill | #14 |
| UNF tap drill (decimal) | 0.1820 in4.62 mm |
| UNEF threads per inch | 32 TPI0.794 mm |
| Clearance drill, close fit | #2 |
| Clearance drill, close (decimal) | 0.2210 in5.61 mm |
| Clearance drill, free fit | #1 |
| Clearance drill, free (decimal) | 0.2280 in5.79 mm |
| d₂Pitch diameter (basic) | 0.1889 in4.798 mm |
| D₁Minor diameter, nut (basic) | 0.1709 in4.341 mm |
#12-24 is used for some equipment racks and sheet-metal work; outside of those it is much less common than #10 or 1/4″.
Also known as
#12-24#12"-24#12-28#12"-28
Tap and clearance drills for #12
Nearest metric thread sizes
All UNC / UNF Threads sizes
Sources
- ASME B1.1-2019: Unified inch screw threads (UN, UNR and UNJ thread forms)
- Machinery's Handbook, 31st ed.: Unified thread series and tap drill sizes
- Little Machine Shop: Tap and clearance drill sizes
- Starrett: Tap drill sizes, close and free fit clearance drills
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.