#10 Thread: TPI, Tap Drill and Clearance Hole
UNC / UNF Threads
The #10 unified thread has a major diameter of 0.1900 in (4.83 mm). Coarse thread (UNC): 24 TPI (1.058 mm), tap drill #25. Fine thread (UNF): 32 TPI (0.794 mm), tap drill #21. Clearance drills, basic pitch and minor diameters and the nearest metric sizes are below.
- dMajor diameter
- 4.83 mm0.1900 in0.1900 in4.83 mm
- UNC threads per inch
- 1.058 mm24 TPI24 TPI1.058 mm
- UNC tap drill
- #25
- UNF threads per inch
- 0.794 mm32 TPI32 TPI0.794 mm
Drawing
#10 specifications
| dMajor diameter | 0.1900 in4.83 mm |
|---|---|
| UNC threads per inch | 24 TPI1.058 mm |
| UNC tap drill | #25 |
| UNC tap drill (decimal) | 0.1495 in3.80 mm |
| UNF threads per inch | 32 TPI0.794 mm |
| UNF tap drill | #21 |
| UNF tap drill (decimal) | 0.1590 in4.04 mm |
| Clearance drill, close fit | #9 |
| Clearance drill, close (decimal) | 0.1960 in4.98 mm |
| Clearance drill, free fit | #7 |
| Clearance drill, free (decimal) | 0.2010 in5.11 mm |
| d₂Pitch diameter (basic) | 0.1629 in4.138 mm |
| D₁Minor diameter, nut (basic) | 0.1449 in3.680 mm |
Both #10 threads are everywhere: #10-24 UNC in general hardware and #10-32 UNF in electronics, instruments and US 19″ equipment racks (Europe uses M6 cage nuts).
Also known as
#10-24#10"-24#10-32#10"-32
Tap and clearance drills for #10
Nearest metric thread sizes
All UNC / UNF Threads sizes
Sources
- ASME B1.1-2019: Unified inch screw threads (UN, UNR and UNJ thread forms)
- Machinery's Handbook, 31st ed.: Unified thread series and tap drill sizes
- Little Machine Shop: Tap and clearance drill sizes
- Starrett: Tap drill sizes, close and free fit clearance drills
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.