#6 Thread: TPI, Tap Drill and Clearance Hole

UNC / UNF Threads

The #6 unified thread has a major diameter of 0.1380 in (3.51 mm). Coarse thread (UNC): 32 TPI (0.794 mm), tap drill #36. Fine thread (UNF): 40 TPI (0.635 mm), tap drill #33. Clearance drills, basic pitch and minor diameters and the nearest metric sizes are below.

dMajor diameter
3.51 mm0.1380 in0.1380 in3.51 mm
UNC threads per inch
0.794 mm32 TPI32 TPI0.794 mm
UNC tap drill
#36
UNF threads per inch
0.635 mm40 TPI40 TPI0.635 mm

Drawing

⌀3.51 mm⌀0.1380 in⌀2.647 mm⌀0.1042 in0.794 mm32 TPI
0.794 mm32 TPI0.429 mm0.0169 inH₁60°
Side view at true pitch (coarse thread); basic 60° profile enlarged.Drawn to scale · Dimensions in mmDimensions in inches

#6 specifications

dMajor diameter0.1380 in3.51 mm
UNC threads per inch32 TPI0.794 mm
UNC tap drill#36
UNC tap drill (decimal)0.1065 in2.71 mm
UNF threads per inch40 TPI0.635 mm
UNF tap drill#33
UNF tap drill (decimal)0.1130 in2.87 mm
Clearance drill, close fit#27
Clearance drill, close (decimal)0.1440 in3.66 mm
Clearance drill, free fit#25
Clearance drill, free (decimal)0.1495 in3.80 mm
d₂Pitch diameter (basic)0.1177 in2.990 mm
D₁Minor diameter, nut (basic)0.1042 in2.647 mm

#6-32 UNC is the familiar PC case screw (hard drives, power supply, case panels). The finer-looking M3 screws in the same cases go into optical drives and SSDs.

Also known as

#6-32#6"-32#6-40#6"-40

Tap and clearance drills for #6

Nearest metric thread sizes

All UNC / UNF Threads sizes

Compare all 24 sizes in the UNC / UNF Threads chart →

Sources

  1. ASME B1.1-2019: Unified inch screw threads (UN, UNR and UNJ thread forms)
  2. Machinery's Handbook, 31st ed.: Unified thread series and tap drill sizes
  3. Little Machine Shop: Tap and clearance drill sizes
  4. Starrett: Tap drill sizes, close and free fit clearance drills

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.