#8 Thread: TPI, Tap Drill and Clearance Hole
UNC / UNF Threads
The #8 unified thread has a major diameter of 0.1640 in (4.17 mm). Coarse thread (UNC): 32 TPI (0.794 mm), tap drill #29. Fine thread (UNF): 36 TPI (0.706 mm), tap drill #29. Clearance drills, basic pitch and minor diameters and the nearest metric sizes are below.
- dMajor diameter
- 4.17 mm0.1640 in0.1640 in4.17 mm
- UNC threads per inch
- 0.794 mm32 TPI32 TPI0.794 mm
- UNC tap drill
- #29
- UNF threads per inch
- 0.706 mm36 TPI36 TPI0.706 mm
Drawing
#8 specifications
| dMajor diameter | 0.1640 in4.17 mm |
|---|---|
| UNC threads per inch | 32 TPI0.794 mm |
| UNC tap drill | #29 |
| UNC tap drill (decimal) | 0.1360 in3.45 mm |
| UNF threads per inch | 36 TPI0.706 mm |
| UNF tap drill | #29 |
| UNF tap drill (decimal) | 0.1360 in3.45 mm |
| Clearance drill, close fit | #18 |
| Clearance drill, close (decimal) | 0.1695 in4.31 mm |
| Clearance drill, free fit | #16 |
| Clearance drill, free (decimal) | 0.1770 in4.50 mm |
| d₂Pitch diameter (basic) | 0.1437 in3.650 mm |
| D₁Minor diameter, nut (basic) | 0.1302 in3.307 mm |
#8-32 is the coarse #8 thread; the UNF #8-36 is rare, so both use the same #29 tap drill.
Also known as
#8-32#8"-32#8-36#8"-36
Tap and clearance drills for #8
Nearest metric thread sizes
All UNC / UNF Threads sizes
Sources
- ASME B1.1-2019: Unified inch screw threads (UN, UNR and UNJ thread forms)
- Machinery's Handbook, 31st ed.: Unified thread series and tap drill sizes
- Little Machine Shop: Tap and clearance drill sizes
- Starrett: Tap drill sizes, close and free fit clearance drills
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.