W10×33 Beam Dimensions & Properties

W Shapes (AISC) · W10: 10 in nominal depth

W10×33 is an AISC wide-flange shape (W10: 10 in nominal depth). It is 9.73 in (247.1 mm) deep with a 7.96 in (202.2 mm) flange, a 0.29 in (7.4 mm) web and a 0.435 in (11.0 mm) flange, and weighs 33 lb/ft (49.1 kg/m). Area 9.71 in² (6,265 mm²); strong-axis Ix = 171 in⁴ (7,117.6 cm⁴), Sx = 35 in³ (573.5 cm³), Zx = 38.8 in³ (635.8 cm³).

dDepth
247.1 mm9.73 in9.73 in247.1 mm
bfFlange width
202.2 mm7.96 in7.96 in202.2 mm
twWeb thickness
7.4 mm0.29 in0.29 in7.4 mm
tfFlange thickness
11.0 mm0.435 in0.435 in11.0 mm

Drawing

202.2 mm7.96 in247.1 mm9.73 intf 11.0 mmtf 0.435 intw 7.4 mmtw 0.29 ink 23.7 mmk 0.935 in
Drawn to scale · Dimensions in mmDimensions in inches

W10×33 specifications

dDepth9.73 in247.1 mm
bfFlange width7.96 in202.2 mm
twWeb thickness0.29 in7.4 mm
tfFlange thickness0.435 in11.0 mm
kDesign value0.935 in23.7 mm
kDetailing value1 1/8 in28.6 mm
k1Detailing value3/4 in19.0 mm
WWeight33 lb/ft49.1 kg/m
AArea9.71 in²6,265 mm²
IxMoment of inertia, strong axis171 in⁴7,117.6 cm⁴
ZxPlastic modulus, strong axis38.8 in³635.8 cm³
SxSection modulus, strong axis35 in³573.5 cm³
rxRadius of gyration, strong axis4.19 in106.4 mm
IyMoment of inertia, weak axis36.6 in⁴1,523.4 cm⁴
ZyPlastic modulus, weak axis14 in³229.4 cm³
SySection modulus, weak axis9.2 in³150.8 cm³
ryRadius of gyration, weak axis1.94 in49.3 mm
JTorsional constant0.583 in⁴24.27 cm⁴
bf/2tfFlange slenderness9.15
h/twWeb slenderness27.1
Metric designationW250×49.1

Also known as

W250×49.1

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.