W14×34 Beam Dimensions & Properties

W Shapes (AISC) · W14: 14 in nominal depth

W14×34 is an AISC wide-flange shape (W14: 14 in nominal depth). It is 14 in (355.6 mm) deep with a 6.75 in (171.5 mm) flange, a 0.285 in (7.2 mm) web and a 0.455 in (11.6 mm) flange, and weighs 34 lb/ft (50.6 kg/m). Area 10 in² (6,452 mm²); strong-axis Ix = 340 in⁴ (14,151.9 cm⁴), Sx = 48.6 in³ (796.4 cm³), Zx = 54.6 in³ (894.7 cm³).

dDepth
355.6 mm14 in14 in355.6 mm
bfFlange width
171.5 mm6.75 in6.75 in171.5 mm
twWeb thickness
7.2 mm0.285 in0.285 in7.2 mm
tfFlange thickness
11.6 mm0.455 in0.455 in11.6 mm

Drawing

171.5 mm6.75 in355.6 mm14 intf 11.6 mmtf 0.455 intw 7.2 mmtw 0.285 ink 21.7 mmk 0.855 in
Drawn to scale · Dimensions in mmDimensions in inches

W14×34 specifications

dDepth14 in355.6 mm
bfFlange width6.75 in171.5 mm
twWeb thickness0.285 in7.2 mm
tfFlange thickness0.455 in11.6 mm
kDesign value0.855 in21.7 mm
kDetailing value1 3/16 in30.2 mm
k1Detailing value3/4 in19.0 mm
WWeight34 lb/ft50.6 kg/m
AArea10 in²6,452 mm²
IxMoment of inertia, strong axis340 in⁴14,151.9 cm⁴
ZxPlastic modulus, strong axis54.6 in³894.7 cm³
SxSection modulus, strong axis48.6 in³796.4 cm³
rxRadius of gyration, strong axis5.83 in148.1 mm
IyMoment of inertia, weak axis23.3 in⁴969.8 cm⁴
ZyPlastic modulus, weak axis10.6 in³173.7 cm³
SySection modulus, weak axis6.91 in³113.2 cm³
ryRadius of gyration, weak axis1.53 in38.9 mm
JTorsional constant0.569 in⁴23.68 cm⁴
bf/2tfFlange slenderness7.41
h/twWeb slenderness43.1
Metric designationW360×51

Also known as

W360×51

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.