W10×39 Beam Dimensions & Properties
W Shapes (AISC) · W10: 10 in nominal depth
W10×39 is an AISC wide-flange shape (W10: 10 in nominal depth). It is 9.92 in (252.0 mm) deep with a 7.99 in (202.9 mm) flange, a 0.315 in (8.0 mm) web and a 0.53 in (13.5 mm) flange, and weighs 39 lb/ft (58.0 kg/m). Area 11.5 in² (7,419 mm²); strong-axis Ix = 209 in⁴ (8,699.2 cm⁴), Sx = 42.1 in³ (689.9 cm³), Zx = 46.8 in³ (766.9 cm³).
- dDepth
- 252.0 mm9.92 in9.92 in252.0 mm
- bfFlange width
- 202.9 mm7.99 in7.99 in202.9 mm
- twWeb thickness
- 8.0 mm0.315 in0.315 in8.0 mm
- tfFlange thickness
- 13.5 mm0.53 in0.53 in13.5 mm
Drawing
W10×39 specifications
| dDepth | 9.92 in252.0 mm |
|---|---|
| bfFlange width | 7.99 in202.9 mm |
| twWeb thickness | 0.315 in8.0 mm |
| tfFlange thickness | 0.53 in13.5 mm |
| kDesign value | 1.03 in26.2 mm |
| kDetailing value | 1 3/16 in30.2 mm |
| k1Detailing value | 13/16 in20.6 mm |
| WWeight | 39 lb/ft58.0 kg/m |
| AArea | 11.5 in²7,419 mm² |
| IxMoment of inertia, strong axis | 209 in⁴8,699.2 cm⁴ |
| ZxPlastic modulus, strong axis | 46.8 in³766.9 cm³ |
| SxSection modulus, strong axis | 42.1 in³689.9 cm³ |
| rxRadius of gyration, strong axis | 4.27 in108.5 mm |
| IyMoment of inertia, weak axis | 45 in⁴1,873 cm⁴ |
| ZyPlastic modulus, weak axis | 17.2 in³281.9 cm³ |
| SySection modulus, weak axis | 11.3 in³185.2 cm³ |
| ryRadius of gyration, weak axis | 1.98 in50.3 mm |
| JTorsional constant | 0.976 in⁴40.62 cm⁴ |
| bf/2tfFlange slenderness | 7.53 |
| h/twWeb slenderness | 25 |
| Metric designation | W250×58 |
Also known as
W250×58
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.