W14×38 Beam Dimensions & Properties

W Shapes (AISC) · W14: 14 in nominal depth

W14×38 is an AISC wide-flange shape (W14: 14 in nominal depth). It is 14.1 in (358.1 mm) deep with a 6.77 in (172.0 mm) flange, a 0.31 in (7.9 mm) web and a 0.515 in (13.1 mm) flange, and weighs 38 lb/ft (56.6 kg/m). Area 11.2 in² (7,226 mm²); strong-axis Ix = 385 in⁴ (16,024.9 cm⁴), Sx = 54.6 in³ (894.7 cm³), Zx = 61.5 in³ (1,007.8 cm³).

dDepth
358.1 mm14.1 in14.1 in358.1 mm
bfFlange width
172.0 mm6.77 in6.77 in172.0 mm
twWeb thickness
7.9 mm0.31 in0.31 in7.9 mm
tfFlange thickness
13.1 mm0.515 in0.515 in13.1 mm

Drawing

172.0 mm6.77 in358.1 mm14.1 intf 13.1 mmtf 0.515 intw 7.9 mmtw 0.31 ink 23.2 mmk 0.915 in
Drawn to scale · Dimensions in mmDimensions in inches

W14×38 specifications

dDepth14.1 in358.1 mm
bfFlange width6.77 in172.0 mm
twWeb thickness0.31 in7.9 mm
tfFlange thickness0.515 in13.1 mm
kDesign value0.915 in23.2 mm
kDetailing value1 1/4 in31.8 mm
k1Detailing value13/16 in20.6 mm
WWeight38 lb/ft56.6 kg/m
AArea11.2 in²7,226 mm²
IxMoment of inertia, strong axis385 in⁴16,024.9 cm⁴
ZxPlastic modulus, strong axis61.5 in³1,007.8 cm³
SxSection modulus, strong axis54.6 in³894.7 cm³
rxRadius of gyration, strong axis5.87 in149.1 mm
IyMoment of inertia, weak axis26.7 in⁴1,111.3 cm⁴
ZyPlastic modulus, weak axis12.1 in³198.3 cm³
SySection modulus, weak axis7.88 in³129.1 cm³
ryRadius of gyration, weak axis1.55 in39.4 mm
JTorsional constant0.798 in⁴33.22 cm⁴
bf/2tfFlange slenderness6.57
h/twWeb slenderness39.6
Metric designationW360×57.8

Also known as

W360×57.8

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.