W14×43 Beam Dimensions & Properties

W Shapes (AISC) · W14: 14 in nominal depth

W14×43 is an AISC wide-flange shape (W14: 14 in nominal depth). It is 13.7 in (348.0 mm) deep with a 8 in (203.2 mm) flange, a 0.305 in (7.7 mm) web and a 0.53 in (13.5 mm) flange, and weighs 43 lb/ft (64.0 kg/m). Area 12.6 in² (8,129 mm²); strong-axis Ix = 428 in⁴ (17,814.7 cm⁴), Sx = 62.6 in³ (1,025.8 cm³), Zx = 69.6 in³ (1,140.5 cm³).

dDepth
348.0 mm13.7 in13.7 in348.0 mm
bfFlange width
203.2 mm8 in8 in203.2 mm
twWeb thickness
7.7 mm0.305 in0.305 in7.7 mm
tfFlange thickness
13.5 mm0.53 in0.53 in13.5 mm

Drawing

203.2 mm8 in348.0 mm13.7 intf 13.5 mmtf 0.53 intw 7.7 mmtw 0.305 ink 28.4 mmk 1.12 in
Drawn to scale · Dimensions in mmDimensions in inches

W14×43 specifications

dDepth13.7 in348.0 mm
bfFlange width8 in203.2 mm
twWeb thickness0.305 in7.7 mm
tfFlange thickness0.53 in13.5 mm
kDesign value1.12 in28.4 mm
kDetailing value1 3/8 in34.9 mm
k1Detailing value1 in25.4 mm
WWeight43 lb/ft64.0 kg/m
AArea12.6 in²8,129 mm²
IxMoment of inertia, strong axis428 in⁴17,814.7 cm⁴
ZxPlastic modulus, strong axis69.6 in³1,140.5 cm³
SxSection modulus, strong axis62.6 in³1,025.8 cm³
rxRadius of gyration, strong axis5.82 in147.8 mm
IyMoment of inertia, weak axis45.2 in⁴1,881.4 cm⁴
ZyPlastic modulus, weak axis17.3 in³283.5 cm³
SySection modulus, weak axis11.3 in³185.2 cm³
ryRadius of gyration, weak axis1.89 in48.0 mm
JTorsional constant1.05 in⁴43.7 cm⁴
bf/2tfFlange slenderness7.54
h/twWeb slenderness37.4
Metric designationW360×64

Also known as

W360×64

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.