W21×44 Beam Dimensions & Properties
W Shapes (AISC) · W21: 21 in nominal depth
W21×44 is an AISC wide-flange shape (W21: 21 in nominal depth). It is 20.7 in (525.8 mm) deep with a 6.5 in (165.1 mm) flange, a 0.35 in (8.9 mm) web and a 0.45 in (11.4 mm) flange, and weighs 44 lb/ft (65.5 kg/m). Area 13 in² (8,387 mm²); strong-axis Ix = 843 in⁴ (35,088.3 cm⁴), Sx = 81.6 in³ (1,337.2 cm³), Zx = 95.4 in³ (1,563.3 cm³).
- dDepth
- 525.8 mm20.7 in20.7 in525.8 mm
- bfFlange width
- 165.1 mm6.5 in6.5 in165.1 mm
- twWeb thickness
- 8.9 mm0.35 in0.35 in8.9 mm
- tfFlange thickness
- 11.4 mm0.45 in0.45 in11.4 mm
Drawing
W21×44 specifications
| dDepth | 20.7 in525.8 mm |
|---|---|
| bfFlange width | 6.5 in165.1 mm |
| twWeb thickness | 0.35 in8.9 mm |
| tfFlange thickness | 0.45 in11.4 mm |
| kDesign value | 0.95 in24.1 mm |
| kDetailing value | 1 1/8 in28.6 mm |
| k1Detailing value | 13/16 in20.6 mm |
| WWeight | 44 lb/ft65.5 kg/m |
| AArea | 13 in²8,387 mm² |
| IxMoment of inertia, strong axis | 843 in⁴35,088.3 cm⁴ |
| ZxPlastic modulus, strong axis | 95.4 in³1,563.3 cm³ |
| SxSection modulus, strong axis | 81.6 in³1,337.2 cm³ |
| rxRadius of gyration, strong axis | 8.06 in204.7 mm |
| IyMoment of inertia, weak axis | 20.7 in⁴861.6 cm⁴ |
| ZyPlastic modulus, weak axis | 10.2 in³167.1 cm³ |
| SySection modulus, weak axis | 6.37 in³104.4 cm³ |
| ryRadius of gyration, weak axis | 1.26 in32.0 mm |
| JTorsional constant | 0.77 in⁴32.05 cm⁴ |
| bf/2tfFlange slenderness | 7.22 |
| h/twWeb slenderness | 53.6 |
| Metric designation | W530×66 |
Also known as
W530×66
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.