W14×48 Beam Dimensions & Properties

W Shapes (AISC) · W14: 14 in nominal depth

W14×48 is an AISC wide-flange shape (W14: 14 in nominal depth). It is 13.8 in (350.5 mm) deep with a 8.03 in (204.0 mm) flange, a 0.34 in (8.6 mm) web and a 0.595 in (15.1 mm) flange, and weighs 48 lb/ft (71.4 kg/m). Area 14.1 in² (9,097 mm²); strong-axis Ix = 484 in⁴ (20,145.6 cm⁴), Sx = 70.2 in³ (1,150.4 cm³), Zx = 78.4 in³ (1,284.7 cm³).

dDepth
350.5 mm13.8 in13.8 in350.5 mm
bfFlange width
204.0 mm8.03 in8.03 in204.0 mm
twWeb thickness
8.6 mm0.34 in0.34 in8.6 mm
tfFlange thickness
15.1 mm0.595 in0.595 in15.1 mm

Drawing

204.0 mm8.03 in350.5 mm13.8 intf 15.1 mmtf 0.595 intw 8.6 mmtw 0.34 ink 30.2 mmk 1.19 in
Drawn to scale · Dimensions in mmDimensions in inches

W14×48 specifications

dDepth13.8 in350.5 mm
bfFlange width8.03 in204.0 mm
twWeb thickness0.34 in8.6 mm
tfFlange thickness0.595 in15.1 mm
kDesign value1.19 in30.2 mm
kDetailing value1 7/16 in36.5 mm
k1Detailing value1 in25.4 mm
WWeight48 lb/ft71.4 kg/m
AArea14.1 in²9,097 mm²
IxMoment of inertia, strong axis484 in⁴20,145.6 cm⁴
ZxPlastic modulus, strong axis78.4 in³1,284.7 cm³
SxSection modulus, strong axis70.2 in³1,150.4 cm³
rxRadius of gyration, strong axis5.85 in148.6 mm
IyMoment of inertia, weak axis51.4 in⁴2,139.4 cm⁴
ZyPlastic modulus, weak axis19.6 in³321.2 cm³
SySection modulus, weak axis12.8 in³209.8 cm³
ryRadius of gyration, weak axis1.91 in48.5 mm
JTorsional constant1.45 in⁴60.35 cm⁴
bf/2tfFlange slenderness6.75
h/twWeb slenderness33.6
Metric designationW360×72

Also known as

W360×72

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.