W14×500 Beam Dimensions & Properties
W Shapes (AISC) · W14: 14 in nominal depth
W14×500 is an AISC wide-flange shape (W14: 14 in nominal depth). It is 19.6 in (497.8 mm) deep with a 17 in (431.8 mm) flange, a 2.19 in (55.6 mm) web and a 3.5 in (88.9 mm) flange, and weighs 500 lb/ft (744.1 kg/m). Area 147 in² (94,839 mm²); strong-axis Ix = 8,210 in⁴ (341,726 cm⁴), Sx = 838 in³ (13,732.4 cm³), Zx = 1,050 in³ (17,206.4 cm³).
- dDepth
- 497.8 mm19.6 in19.6 in497.8 mm
- bfFlange width
- 431.8 mm17 in17 in431.8 mm
- twWeb thickness
- 55.6 mm2.19 in2.19 in55.6 mm
- tfFlange thickness
- 88.9 mm3.5 in3.5 in88.9 mm
Drawing
W14×500 specifications
| dDepth | 19.6 in497.8 mm |
|---|---|
| bfFlange width | 17 in431.8 mm |
| twWeb thickness | 2.19 in55.6 mm |
| tfFlange thickness | 3.5 in88.9 mm |
| kDesign value | 4.1 in104.1 mm |
| kDetailing value | 4 13/16 in122.2 mm |
| k1Detailing value | 2 5/16 in58.7 mm |
| WWeight | 500 lb/ft744.1 kg/m |
| AArea | 147 in²94,839 mm² |
| IxMoment of inertia, strong axis | 8,210 in⁴341,726 cm⁴ |
| ZxPlastic modulus, strong axis | 1,050 in³17,206.4 cm³ |
| SxSection modulus, strong axis | 838 in³13,732.4 cm³ |
| rxRadius of gyration, strong axis | 7.48 in190.0 mm |
| IyMoment of inertia, weak axis | 2,880 in⁴119,874.7 cm⁴ |
| ZyPlastic modulus, weak axis | 522 in³8,554 cm³ |
| SySection modulus, weak axis | 339 in³5,555.2 cm³ |
| ryRadius of gyration, weak axis | 4.43 in112.5 mm |
| JTorsional constant | 514 in⁴21,394.3 cm⁴ |
| bf/2tfFlange slenderness | 2.43 |
| h/twWeb slenderness | 5.2 |
| Metric designation | W360×744 |
Also known as
W360×744
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.