W14×550 Beam Dimensions & Properties

W Shapes (AISC) · W14: 14 in nominal depth

W14×550 is an AISC wide-flange shape (W14: 14 in nominal depth). It is 20.2 in (513.1 mm) deep with a 17.2 in (436.9 mm) flange, a 2.38 in (60.5 mm) web and a 3.82 in (97.0 mm) flange, and weighs 550 lb/ft (818.5 kg/m). Area 162 in² (104,516 mm²); strong-axis Ix = 9,430 in⁴ (392,506.2 cm⁴), Sx = 931 in³ (15,256.4 cm³), Zx = 1,180 in³ (19,336.7 cm³).

dDepth
513.1 mm20.2 in20.2 in513.1 mm
bfFlange width
436.9 mm17.2 in17.2 in436.9 mm
twWeb thickness
60.5 mm2.38 in2.38 in60.5 mm
tfFlange thickness
97.0 mm3.82 in3.82 in97.0 mm

Drawing

436.9 mm17.2 in513.1 mm20.2 intf 97.0 mmtf 3.82 intw 60.5 mmtw 2.38 ink 112.3 mmk 4.42 in
Drawn to scale · Dimensions in mmDimensions in inches

W14×550 specifications

dDepth20.2 in513.1 mm
bfFlange width17.2 in436.9 mm
twWeb thickness2.38 in60.5 mm
tfFlange thickness3.82 in97.0 mm
kDesign value4.42 in112.3 mm
kDetailing value5 1/8 in130.2 mm
k1Detailing value2 3/8 in60.3 mm
WWeight550 lb/ft818.5 kg/m
AArea162 in²104,516 mm²
IxMoment of inertia, strong axis9,430 in⁴392,506.2 cm⁴
ZxPlastic modulus, strong axis1,180 in³19,336.7 cm³
SxSection modulus, strong axis931 in³15,256.4 cm³
rxRadius of gyration, strong axis7.63 in193.8 mm
IyMoment of inertia, weak axis3,250 in⁴135,275.2 cm⁴
ZyPlastic modulus, weak axis583 in³9,553.7 cm³
SySection modulus, weak axis378 in³6,194.3 cm³
ryRadius of gyration, weak axis4.49 in114.0 mm
JTorsional constant669 in⁴27,845.88 cm⁴
bf/2tfFlange slenderness2.25
h/twWeb slenderness4.8
Metric designationW360×818

Also known as

W360×818

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.