W36×487 Beam Dimensions & Properties

W Shapes (AISC) · W36: 36 in nominal depth

W36×487 is an AISC wide-flange shape (W36: 36 in nominal depth). It is 39.3 in (998.2 mm) deep with a 17.1 in (434.3 mm) flange, a 1.5 in (38.1 mm) web and a 2.68 in (68.1 mm) flange, and weighs 487 lb/ft (724.7 kg/m). Area 143 in² (92,258 mm²); strong-axis Ix = 36,000 in⁴ (1,498,433.1 cm⁴), Sx = 1,830 in³ (29,988.3 cm³), Zx = 2,130 in³ (34,904.4 cm³).

dDepth
998.2 mm39.3 in39.3 in998.2 mm
bfFlange width
434.3 mm17.1 in17.1 in434.3 mm
twWeb thickness
38.1 mm1.5 in1.5 in38.1 mm
tfFlange thickness
68.1 mm2.68 in2.68 in68.1 mm

Drawing

434.3 mm17.1 in998.2 mm39.3 intf 68.1 mmtf 2.68 intw 38.1 mmtw 1.5 ink 92.2 mmk 3.63 in
Drawn to scale · Dimensions in mmDimensions in inches

W36×487 specifications

dDepth39.3 in998.2 mm
bfFlange width17.1 in434.3 mm
twWeb thickness1.5 in38.1 mm
tfFlange thickness2.68 in68.1 mm
kDesign value3.63 in92.2 mm
kDetailing value4 in101.6 mm
k1Detailing value1 7/8 in47.6 mm
WWeight487 lb/ft724.7 kg/m
AArea143 in²92,258 mm²
IxMoment of inertia, strong axis36,000 in⁴1,498,433.1 cm⁴
ZxPlastic modulus, strong axis2,130 in³34,904.4 cm³
SxSection modulus, strong axis1,830 in³29,988.3 cm³
rxRadius of gyration, strong axis15.8 in401.3 mm
IyMoment of inertia, weak axis2,250 in⁴93,652.1 cm⁴
ZyPlastic modulus, weak axis412 in³6,751.5 cm³
SySection modulus, weak axis263 in³4,309.8 cm³
ryRadius of gyration, weak axis3.96 in100.6 mm
JTorsional constant258 in⁴10,738.77 cm⁴
bf/2tfFlange slenderness3.19
h/twWeb slenderness21.4
Metric designationW920×725

Also known as

W920×725

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.