W27×539 Beam Dimensions & Properties
W Shapes (AISC) · W27: 27 in nominal depth
W27×539 is an AISC wide-flange shape (W27: 27 in nominal depth). It is 32.5 in (825.5 mm) deep with a 15.3 in (388.6 mm) flange, a 1.97 in (50.0 mm) web and a 3.54 in (89.9 mm) flange, and weighs 539 lb/ft (802.1 kg/m). Area 159 in² (102,580 mm²); strong-axis Ix = 25,600 in⁴ (1,065,552.4 cm⁴), Sx = 1,570 in³ (25,727.7 cm³), Zx = 1,890 in³ (30,971.6 cm³).
- dDepth
- 825.5 mm32.5 in32.5 in825.5 mm
- bfFlange width
- 388.6 mm15.3 in15.3 in388.6 mm
- twWeb thickness
- 50.0 mm1.97 in1.97 in50.0 mm
- tfFlange thickness
- 89.9 mm3.54 in3.54 in89.9 mm
Drawing
W27×539 specifications
| dDepth | 32.5 in825.5 mm |
|---|---|
| bfFlange width | 15.3 in388.6 mm |
| twWeb thickness | 1.97 in50.0 mm |
| tfFlange thickness | 3.54 in89.9 mm |
| kDesign value | 4.33 in110.0 mm |
| kDetailing value | 4 7/16 in112.7 mm |
| k1Detailing value | 1 13/16 in46.0 mm |
| WWeight | 539 lb/ft802.1 kg/m |
| AArea | 159 in²102,580 mm² |
| IxMoment of inertia, strong axis | 25,600 in⁴1,065,552.4 cm⁴ |
| ZxPlastic modulus, strong axis | 1,890 in³30,971.6 cm³ |
| SxSection modulus, strong axis | 1,570 in³25,727.7 cm³ |
| rxRadius of gyration, strong axis | 12.7 in322.6 mm |
| IyMoment of inertia, weak axis | 2,110 in⁴87,824.8 cm⁴ |
| ZyPlastic modulus, weak axis | 437 in³7,161.1 cm³ |
| SySection modulus, weak axis | 277 in³4,539.2 cm³ |
| ryRadius of gyration, weak axis | 3.65 in92.7 mm |
| JTorsional constant | 496 in⁴20,645.08 cm⁴ |
| bf/2tfFlange slenderness | 2.15 |
| h/twWeb slenderness | 12.1 |
| Metric designation | W690×802 |
Also known as
W690×802
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.