W27×368 Beam Dimensions & Properties

W Shapes (AISC) · W27: 27 in nominal depth

W27×368 is an AISC wide-flange shape (W27: 27 in nominal depth). It is 30.4 in (772.2 mm) deep with a 14.7 in (373.4 mm) flange, a 1.38 in (35.1 mm) web and a 2.48 in (63.0 mm) flange, and weighs 368 lb/ft (547.6 kg/m). Area 109 in² (70,322 mm²); strong-axis Ix = 16,200 in⁴ (674,294.9 cm⁴), Sx = 1,060 in³ (17,370.3 cm³), Zx = 1,240 in³ (20,320 cm³).

dDepth
772.2 mm30.4 in30.4 in772.2 mm
bfFlange width
373.4 mm14.7 in14.7 in373.4 mm
twWeb thickness
35.1 mm1.38 in1.38 in35.1 mm
tfFlange thickness
63.0 mm2.48 in2.48 in63.0 mm

Drawing

373.4 mm14.7 in772.2 mm30.4 intf 63.0 mmtf 2.48 intw 35.1 mmtw 1.38 ink 83.1 mmk 3.27 in
Drawn to scale · Dimensions in mmDimensions in inches

W27×368 specifications

dDepth30.4 in772.2 mm
bfFlange width14.7 in373.4 mm
twWeb thickness1.38 in35.1 mm
tfFlange thickness2.48 in63.0 mm
kDesign value3.27 in83.1 mm
kDetailing value3 11/16 in93.7 mm
k1Detailing value1 7/8 in47.6 mm
WWeight368 lb/ft547.6 kg/m
AArea109 in²70,322 mm²
IxMoment of inertia, strong axis16,200 in⁴674,294.9 cm⁴
ZxPlastic modulus, strong axis1,240 in³20,320 cm³
SxSection modulus, strong axis1,060 in³17,370.3 cm³
rxRadius of gyration, strong axis12.2 in309.9 mm
IyMoment of inertia, weak axis1,310 in⁴54,526.3 cm⁴
ZyPlastic modulus, weak axis279 in³4,572 cm³
SySection modulus, weak axis179 in³2,933.3 cm³
ryRadius of gyration, weak axis3.48 in88.4 mm
JTorsional constant170 in⁴7,075.93 cm⁴
bf/2tfFlange slenderness2.96
h/twWeb slenderness17.3
Metric designationW690×548

Also known as

W690×548

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.