W36×529 Beam Dimensions & Properties
W Shapes (AISC) · W36: 36 in nominal depth
W36×529 is an AISC wide-flange shape (W36: 36 in nominal depth). It is 39.8 in (1010.9 mm) deep with a 17.2 in (436.9 mm) flange, a 1.61 in (40.9 mm) web and a 2.91 in (73.9 mm) flange, and weighs 529 lb/ft (787.2 kg/m). Area 156 in² (100,645 mm²); strong-axis Ix = 39,600 in⁴ (1,648,276.4 cm⁴), Sx = 1,990 in³ (32,610.3 cm³), Zx = 2,330 in³ (38,181.9 cm³).
- dDepth
- 1010.9 mm39.8 in39.8 in1010.9 mm
- bfFlange width
- 436.9 mm17.2 in17.2 in436.9 mm
- twWeb thickness
- 40.9 mm1.61 in1.61 in40.9 mm
- tfFlange thickness
- 73.9 mm2.91 in2.91 in73.9 mm
Drawing
W36×529 specifications
| dDepth | 39.8 in1010.9 mm |
|---|---|
| bfFlange width | 17.2 in436.9 mm |
| twWeb thickness | 1.61 in40.9 mm |
| tfFlange thickness | 2.91 in73.9 mm |
| kDesign value | 3.86 in98.0 mm |
| kDetailing value | 4 3/16 in106.4 mm |
| k1Detailing value | 2 in50.8 mm |
| WWeight | 529 lb/ft787.2 kg/m |
| AArea | 156 in²100,645 mm² |
| IxMoment of inertia, strong axis | 39,600 in⁴1,648,276.4 cm⁴ |
| ZxPlastic modulus, strong axis | 2,330 in³38,181.9 cm³ |
| SxSection modulus, strong axis | 1,990 in³32,610.3 cm³ |
| rxRadius of gyration, strong axis | 16 in406.4 mm |
| IyMoment of inertia, weak axis | 2,490 in⁴103,641.6 cm⁴ |
| ZyPlastic modulus, weak axis | 454 in³7,439.7 cm³ |
| SySection modulus, weak axis | 289 in³4,735.9 cm³ |
| ryRadius of gyration, weak axis | 4 in101.6 mm |
| JTorsional constant | 327 in⁴13,610.77 cm⁴ |
| bf/2tfFlange slenderness | 2.96 |
| h/twWeb slenderness | 19.9 |
| Metric designation | W920×787 |
Also known as
W920×787
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.