W12×14 Beam Dimensions & Properties

W Shapes (AISC) · W12: 12 in nominal depth

W12×14 is an AISC wide-flange shape (W12: 12 in nominal depth). It is 11.9 in (302.3 mm) deep with a 3.97 in (100.8 mm) flange, a 0.2 in (5.1 mm) web and a 0.225 in (5.7 mm) flange, and weighs 14 lb/ft (20.8 kg/m). Area 4.16 in² (2,684 mm²); strong-axis Ix = 88.6 in⁴ (3,687.8 cm⁴), Sx = 14.9 in³ (244.2 cm³), Zx = 17.4 in³ (285.1 cm³).

dDepth
302.3 mm11.9 in11.9 in302.3 mm
bfFlange width
100.8 mm3.97 in3.97 in100.8 mm
twWeb thickness
5.1 mm0.2 in0.2 in5.1 mm
tfFlange thickness
5.7 mm0.225 in0.225 in5.7 mm

Drawing

100.8 mm3.97 in302.3 mm11.9 intf 5.7 mmtf 0.225 intw 5.1 mmtw 0.2 ink 13.3 mmk 0.525 in
Drawn to scale · Dimensions in mmDimensions in inches

W12×14 specifications

dDepth11.9 in302.3 mm
bfFlange width3.97 in100.8 mm
twWeb thickness0.2 in5.1 mm
tfFlange thickness0.225 in5.7 mm
kDesign value0.525 in13.3 mm
kDetailing value3/4 in19.0 mm
k1Detailing value9/16 in14.3 mm
WWeight14 lb/ft20.8 kg/m
AArea4.16 in²2,684 mm²
IxMoment of inertia, strong axis88.6 in⁴3,687.8 cm⁴
ZxPlastic modulus, strong axis17.4 in³285.1 cm³
SxSection modulus, strong axis14.9 in³244.2 cm³
rxRadius of gyration, strong axis4.62 in117.3 mm
IyMoment of inertia, weak axis2.36 in⁴98.2 cm⁴
ZyPlastic modulus, weak axis1.9 in³31.1 cm³
SySection modulus, weak axis1.19 in³19.5 cm³
ryRadius of gyration, weak axis0.75 in19.1 mm
JTorsional constant0.07 in⁴2.93 cm⁴
bf/2tfFlange slenderness8.82
h/twWeb slenderness54.3
Metric designationW310×21

Also known as

W310×21

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.