W8×21 Beam Dimensions & Properties
W Shapes (AISC) · W8: 8 in nominal depth
W8×21 is an AISC wide-flange shape (W8: 8 in nominal depth). It is 8.28 in (210.3 mm) deep with a 5.27 in (133.9 mm) flange, a 0.25 in (6.4 mm) web and a 0.4 in (10.2 mm) flange, and weighs 21 lb/ft (31.3 kg/m). Area 6.16 in² (3,974 mm²); strong-axis Ix = 75.3 in⁴ (3,134.2 cm⁴), Sx = 18.2 in³ (298.2 cm³), Zx = 20.4 in³ (334.3 cm³).
- dDepth
- 210.3 mm8.28 in8.28 in210.3 mm
- bfFlange width
- 133.9 mm5.27 in5.27 in133.9 mm
- twWeb thickness
- 6.4 mm0.25 in0.25 in6.4 mm
- tfFlange thickness
- 10.2 mm0.4 in0.4 in10.2 mm
Drawing
W8×21 specifications
| dDepth | 8.28 in210.3 mm |
|---|---|
| bfFlange width | 5.27 in133.9 mm |
| twWeb thickness | 0.25 in6.4 mm |
| tfFlange thickness | 0.4 in10.2 mm |
| kDesign value | 0.7 in17.8 mm |
| kDetailing value | 7/8 in22.2 mm |
| k1Detailing value | 9/16 in14.3 mm |
| WWeight | 21 lb/ft31.3 kg/m |
| AArea | 6.16 in²3,974 mm² |
| IxMoment of inertia, strong axis | 75.3 in⁴3,134.2 cm⁴ |
| ZxPlastic modulus, strong axis | 20.4 in³334.3 cm³ |
| SxSection modulus, strong axis | 18.2 in³298.2 cm³ |
| rxRadius of gyration, strong axis | 3.49 in88.6 mm |
| IyMoment of inertia, weak axis | 9.77 in⁴406.7 cm⁴ |
| ZyPlastic modulus, weak axis | 5.69 in³93.2 cm³ |
| SySection modulus, weak axis | 3.71 in³60.8 cm³ |
| ryRadius of gyration, weak axis | 1.26 in32.0 mm |
| JTorsional constant | 0.282 in⁴11.74 cm⁴ |
| bf/2tfFlange slenderness | 6.59 |
| h/twWeb slenderness | 27.5 |
| Metric designation | W200×31.3 |
Also known as
W200×31.3
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.