Button Head Socket Screw Dimensions (ISO 7380)

Button head socket screws have a low, domed head with a hex socket. ISO 7380-1 fixes the head; ISO 7380-2 adds a thin collar (flange) under it. An M6 button head is 10.5 mm across, 3.3 mm high and takes a 4 mm hex key.

8 sizesChecked 2026-11-154 sources

Size chartTap a size for its drawing and full specs

8 of 8
ThreadPPitchmmindkHead diametermminkHead heightmminsHex key sizemmindcCollar dia. ISO 7380-2 (max)mmin
M30.50.01975.70.2241.650.065020.0796.90.272
M40.70.02767.60.2992.20.08662.50.0989.40.370
M50.80.03159.50.3742.750.108330.11811.80.465
M610.039410.50.4133.30.129940.15713.60.535
M81.250.0492140.5514.40.173250.19717.80.701
M101.50.059117.50.6895.50.216560.23621.90.862
M121.750.0689210.8276.60.259880.315261.024
M1620.0787281.1028.80.3465100.394341.339

How to read the chart

dk is the largest head diameter and k the head height; both are maximum values from ISO 7380-1. s is the hex key that fits the socket. The length of a button head screw is measured under the head, from the bearing face to the tip.

dc is the collar diameter of the flanged version (ISO 7380-2). The collar spreads the load on soft materials and covers an oversized hole, so you often do not need a washer.

Note the hex key: button heads use a key one size smaller than socket cap screws from M4 up. An M6 cap screw takes 5 mm, an M6 button head 4 mm; an M8 cap screw 6 mm, an M8 button head 5 mm.

About Button Head Screws

Button head screws are chosen for looks and for low head height: guards, covers, profiles and 3D-printer frames. The smaller socket limits tightening torque, so ISO 7380 classes them as screws with reduced loadability: a 10.9 button head screw is not tested to the full 10.9 proof load. For structural joints use a socket cap screw.

The standard covers M3 to M16 in coarse pitch, steel 8.8, 10.9, 12.9 and stainless A2/A4. Torx (hexalobular) button heads exist with the same head shape; see Torx sizes for the drive.

Inch button head screws (ASME B18.3) follow a different head table and are not interchangeable in the socket: a 5/32 in key is close to 4 mm but will round out a metric socket under torque.

Which washer or counterbore?

A plain washer of the matching size works under the plain head ISO 7380-1. In aluminium extrusion slots the flanged ISO 7380-2 version usually replaces screw plus washer. Button heads are not meant for counterbores; their head diameter is about 1.75 × d, larger than a cap screw head.

Questions

What size Allen key fits an M5 button head screw?

3 mm. The full set: M3 2 mm, M4 2.5 mm, M5 3 mm, M6 4 mm, M8 5 mm, M10 6 mm, M12 8 mm, M16 10 mm.

Is a button head screw as strong as a socket cap screw?

No. The thread is the same, but the low head and smaller socket limit the torque. ISO 7380 calls them screws with reduced loadability; use cap screws (ISO 4762) for highly loaded joints.

What is the head diameter of an M4 button head screw?

7.6 mm maximum, with a head height of 2.2 mm (ISO 7380-1). The flanged version has a 9.4 mm collar.

How is the length of a button head screw measured?

From under the head to the end of the screw. An M5×10 button head screw has 10 mm of shank below the head.

Sources

  1. ISO 7380-1:2011, Button head screws, part 1: hexagon socket button head screws
  2. ISO 7380-2:2022, Button head screws, part 2: hexagon socket button head screws with collar
  3. Westfield Fasteners: ISO 7380-1 and ISO 7380-2 dimension tables
  4. Accu: Socket button screws ISO 7380 product data

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.