[-250×90×9×13 Channel Dimensions & Properties

Channels (UPN, UPE, PFC, JIS) · JIS channels (JIS G 3192)

[-250×90×9×13 (JIS channels, JIS G 3192) is 250 mm (9.843 in) deep with a 90 mm (3.543 in) flange, a 9 mm (0.354 in) web and a 13 mm (0.512 in) flange. Mass 34.6 kg/m (23.250 lb/ft), area 44.07 cm² (6.831 in²); strong-axis I = 4,180 cm⁴ (100.42 in⁴), Wel = 334 cm³ (20.38 in³).

hDepth
250 mm9.843 in9.843 in250 mm
bFlange width
90 mm3.543 in3.543 in90 mm
twWeb thickness
9 mm0.354 in0.354 in9 mm
tfFlange thickness
13 mm0.512 in0.512 in13 mm

Drawing

90 mm3.543 in250 mm9.843 intf 13 mmtf 0.512 intw 9 mmtw 0.354 ine 2.4 cme 0.945 in
Flanges drawn parallel; toe radius not drawn.Drawn to scale · Dimensions in mmDimensions in inches

[-250×90×9×13 specifications

hDepth250 mm9.843 in
bFlange width90 mm3.543 in
twWeb thickness9 mm0.354 in
tfFlange thickness13 mm0.512 in
r1Root radius14 mm0.551 in
r2Toe radius7 mm0.276 in
GMass34.6 kg/m23.250 lb/ft
AArea44.07 cm²6.831 in²
eCentroid from back of web2.4 cm0.945 in
IyMoment of inertia, strong axis4,180 cm⁴100.42 in⁴
Wel,yElastic modulus, strong axis334 cm³20.38 in³
iyRadius of gyration, strong axis9.74 cm3.835 in
IzMoment of inertia, weak axis294 cm⁴7.06 in⁴
Wel,zElastic modulus, weak axis44.5 cm³2.72 in³
izRadius of gyration, weak axis2.58 cm1.016 in

Also known as

C-250x90x9x13C250x90

Channels of about the same depth in other series

All Channels (UPN, UPE, PFC, JIS) sizes

Compare all 58 sections in the Channels (UPN, UPE, PFC, JIS) chart →

Sources

  1. EN 10279:2000, Hot rolled steel channels. Tolerances on shape, dimension and mass
  2. EN 10365:2017, Hot rolled steel channels, I and H sections. Dimensions and masses
  3. ArcelorMittal: Sections and Merchant Bars sales programme, UPN and UPE tables
  4. SCI / BCSA: Steel Building Design: Design Data (Blue Book), parallel flange channels
  5. JIS G 3192:2024 and JFE Steel building steel handbook, channel section table

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.