260×75×28 PFC Channel Dimensions & Properties

Channels (UPN, UPE, PFC, JIS) · PFC: British parallel flange channels (BS 4-1)

260×75×28 PFC (PFC: British parallel flange channels, BS 4-1) is 260 mm (10.236 in) deep with a 75 mm (2.953 in) flange, a 7 mm (0.276 in) web and a 12 mm (0.472 in) flange. Mass 27.6 kg/m (18.546 lb/ft), area 35.1 cm² (5.441 in²); strong-axis I = 3,620 cm⁴ (86.97 in⁴), Wel = 278 cm³ (16.96 in³).

hDepth
260 mm10.236 in10.236 in260 mm
bFlange width
75 mm2.953 in2.953 in75 mm
twWeb thickness
7 mm0.276 in0.276 in7 mm
tfFlange thickness
12 mm0.472 in0.472 in12 mm

Drawing

75 mm2.953 in260 mm10.236 intf 12 mmtf 0.472 intw 7 mmtw 0.276 ine 2.1 cme 0.827 in
Drawn to scale · Dimensions in mmDimensions in inches

260×75×28 PFC specifications

hDepth260 mm10.236 in
bFlange width75 mm2.953 in
twWeb thickness7 mm0.276 in
tfFlange thickness12 mm0.472 in
r1Root radius12 mm0.472 in
GMass27.6 kg/m18.546 lb/ft
AArea35.1 cm²5.441 in²
eCentroid from back of web2.1 cm0.827 in
IyMoment of inertia, strong axis3,620 cm⁴86.97 in⁴
Wel,yElastic modulus, strong axis278 cm³16.96 in³
Wpl,yPlastic modulus, strong axis328 cm³20.02 in³
iyRadius of gyration, strong axis10.1 cm3.976 in
IzMoment of inertia, weak axis185 cm⁴4.44 in⁴
Wel,zElastic modulus, weak axis34.4 cm³2.1 in³
izRadius of gyration, weak axis2.3 cm0.906 in

Also known as

PFC260x75x28

Channels of about the same depth in other series

All Channels (UPN, UPE, PFC, JIS) sizes

Compare all 58 sections in the Channels (UPN, UPE, PFC, JIS) chart →

Sources

  1. EN 10279:2000, Hot rolled steel channels. Tolerances on shape, dimension and mass
  2. EN 10365:2017, Hot rolled steel channels, I and H sections. Dimensions and masses
  3. ArcelorMittal: Sections and Merchant Bars sales programme, UPN and UPE tables
  4. SCI / BCSA: Steel Building Design: Design Data (Blue Book), parallel flange channels
  5. JIS G 3192:2024 and JFE Steel building steel handbook, channel section table

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.