1/2" EMT Conduit Dimensions & Fill
Conduit Sizes · EMT: electrical metallic tubing
1/2" EMT conduit has a nominal inside diameter of 0.622 in (15.8 mm) and a total inside area of 0.304 in² (196 mm²). NEC Chapter 9 allows 0.122 in² (79 mm²) for three or more conductors (40 %), 0.094 in² (61 mm²) for two and 0.161 in² (104 mm²) for one.
- IDInside diameter (nominal)
- 15.8 mm0.622 in0.622 in15.8 mm
- ODOutside diameter
- 17.9 mm0.706 in0.706 in17.9 mm
- A₄₀Fill area, over 2 wires (40 %)
- 79 mm²0.122 in²0.122 in²79 mm²
Drawing
1/2" EMT specifications
| Metric designator | 16 |
|---|---|
| ODOutside diameter | 0.706 in17.9 mm |
| IDInside diameter (nominal) | 0.622 in15.8 mm |
| ATotal inside area (100 %) | 0.304 in²196 mm² |
| A₄₀Fill area, over 2 wires (40 %) | 0.122 in²79 mm² |
| A₃₁Fill area, 2 wires (31 %) | 0.094 in²61 mm² |
| A₅₃Fill area, 1 wire (53 %) | 0.161 in²104 mm² |
Holds up to 9 × 12 AWG or 12 × 14 AWG THHN at 40 % fill (NEC Annex C).
Same trade size, other conduit types
All Conduit Sizes sizes
Sources
- NFPA 70 (National Electrical Code), Chapter 9 Tables 1, 4 and 5
- NECA/IBEW: NEC Chapter 9 Table 4, Dimensions and percent area of conduit and tubing
- Wheatland Tube: EMT and conduit brochure (ANSI C80.1 / C80.3 / C80.6 dimensions)
- Steel Tube Institute: Intermediate metal conduit
- PDHonline E276: Conduit fill calculations (NEC Chapter 9 worked examples)
- IEC 61386-1 / EN 61386: Conduit systems for cable management; EN 60423: conduit outside diameters and threads
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.