M10 Lock Washer Dimensions
Lock Washers
For an M10 bolt, the DIN 127 B split spring washer is 10.2 mm (0.402 in) inside (min), up to 18.1 mm (0.713 in) outside and 2.2 mm (0.087 in) thick. The DIN 6798 tooth washer and the DIN 6796 conical spring washer for the same bolt are in the table below where the standard lists them.
- d2Split DIN 127 B: outside (max)
- 18.1 mm0.713 in0.713 in18.1 mm
- sSplit DIN 127 B: thickness
- 2.2 mm0.087 in0.087 in2.2 mm
- Tooth DIN 6798: outside
- 18 mm0.709 in0.709 in18 mm
- Conical DIN 6796: outside
- 23 mm0.906 in0.906 in23 mm
Drawing
M10 specifications
| d1Split DIN 127 B: inside (min) | 10.2 mm0.402 in |
|---|---|
| d2Split DIN 127 B: outside (max) | 18.1 mm0.713 in |
| sSplit DIN 127 B: thickness | 2.2 mm0.087 in |
| Tooth DIN 6798: inside | 10.5 mm0.413 in |
| Tooth DIN 6798: outside | 18 mm0.709 in |
| Tooth DIN 6798: thickness | 0.9 mm0.035 in |
| Conical DIN 6796: inside | 10.5 mm0.413 in |
| Conical DIN 6796: outside | 23 mm0.906 in |
| Conical DIN 6796: thickness | 2.5 mm0.098 in |
| Conical DIN 6796: height (max) | 3.2 mm0.1260 in |
M10 in other charts
All Lock Washers sizes
Sources
- DIN 127: Spring lock washers with square or tang ends (withdrawn)
- DIN 6798: Serrated lock washers (withdrawn)
- DIN 6796:2009, Conical spring washers for bolted connections
- Westfield Fasteners: DIN 127 B spring washer table
- Westfield Fasteners: DIN 6796 conical spring washers
- Böllhoff: DIN 6798 A stainless A2 data sheet
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.