9/16″ Thread: TPI, Tap Drill and Clearance Hole
UNC / UNF Threads
The 9/16″ unified thread has a major diameter of 0.5625 in (14.29 mm). Coarse thread (UNC): 12 TPI (2.117 mm), tap drill 31/64″. Fine thread (UNF): 18 TPI (1.411 mm), tap drill 33/64″. Clearance drills, basic pitch and minor diameters and the nearest metric sizes are below.
- dMajor diameter
- 14.29 mm0.5625 in0.5625 in14.29 mm
- UNC threads per inch
- 2.117 mm12 TPI12 TPI2.117 mm
- UNC tap drill
- 31/64″
- UNF threads per inch
- 1.411 mm18 TPI18 TPI1.411 mm
Drawing
9/16″ specifications
| dMajor diameter | 0.5625 in14.29 mm |
|---|---|
| UNC threads per inch | 12 TPI2.117 mm |
| UNC tap drill | 31/64″ |
| UNC tap drill (decimal) | 0.4844 in12.30 mm |
| UNF threads per inch | 18 TPI1.411 mm |
| UNF tap drill | 33/64″ |
| UNF tap drill (decimal) | 0.5156 in13.10 mm |
| UNEF threads per inch | 24 TPI1.058 mm |
| Clearance drill, close fit | 37/64″ |
| Clearance drill, close (decimal) | 0.5781 in14.68 mm |
| Clearance drill, free fit | 19/32″ |
| Clearance drill, free (decimal) | 0.5938 in15.08 mm |
| d₂Pitch diameter (basic) | 0.5084 in12.913 mm |
| D₁Minor diameter, nut (basic) | 0.4723 in11.996 mm |
Also known as
9/16-129/16"-129/16-189/16"-18
Tap and clearance drills for 9/16″
Nearest metric thread sizes
All UNC / UNF Threads sizes
Sources
- ASME B1.1-2019: Unified inch screw threads (UN, UNR and UNJ thread forms)
- Machinery's Handbook, 31st ed.: Unified thread series and tap drill sizes
- Little Machine Shop: Tap and clearance drill sizes
- Starrett: Tap drill sizes, close and free fit clearance drills
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.