3/4″ Thread: TPI, Tap Drill and Clearance Hole

UNC / UNF Threads

The 3/4″ unified thread has a major diameter of 0.7500 in (19.05 mm). Coarse thread (UNC): 10 TPI (2.540 mm), tap drill 21/32″. Fine thread (UNF): 16 TPI (1.588 mm), tap drill 11/16″. Clearance drills, basic pitch and minor diameters and the nearest metric sizes are below.

dMajor diameter
19.05 mm0.7500 in0.7500 in19.05 mm
UNC threads per inch
2.540 mm10 TPI10 TPI2.540 mm
UNC tap drill
21/32″
UNF threads per inch
1.588 mm16 TPI16 TPI1.588 mm

Drawing

⌀19.05 mm⌀0.7500 in⌀16.299 mm⌀0.6417 in2.540 mm10 TPI
2.540 mm10 TPI1.374 mm0.0541 inH₁60°
Side view at true pitch (coarse thread); basic 60° profile enlarged.Drawn to scale · Dimensions in mmDimensions in inches

3/4″ specifications

dMajor diameter0.7500 in19.05 mm
UNC threads per inch10 TPI2.540 mm
UNC tap drill21/32″
UNC tap drill (decimal)0.6563 in16.67 mm
UNF threads per inch16 TPI1.588 mm
UNF tap drill11/16″
UNF tap drill (decimal)0.6875 in17.46 mm
UNEF threads per inch20 TPI1.270 mm
Clearance drill, close fit49/64″
Clearance drill, close (decimal)0.7656 in19.45 mm
Clearance drill, free fit25/32″
Clearance drill, free (decimal)0.7813 in19.85 mm
d₂Pitch diameter (basic)0.6850 in17.399 mm
D₁Minor diameter, nut (basic)0.6417 in16.299 mm

Also known as

3/4-103/4"-103/4-163/4"-16

Nearest metric thread sizes

All UNC / UNF Threads sizes

Compare all 24 sizes in the UNC / UNF Threads chart →

Sources

  1. ASME B1.1-2019: Unified inch screw threads (UN, UNR and UNJ thread forms)
  2. Machinery's Handbook, 31st ed.: Unified thread series and tap drill sizes
  3. Little Machine Shop: Tap and clearance drill sizes
  4. Starrett: Tap drill sizes, close and free fit clearance drills

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.