W14×22 Beam Dimensions & Properties

W Shapes (AISC) · W14: 14 in nominal depth

W14×22 is an AISC wide-flange shape (W14: 14 in nominal depth). It is 13.7 in (348.0 mm) deep with a 5 in (127.0 mm) flange, a 0.23 in (5.8 mm) web and a 0.335 in (8.5 mm) flange, and weighs 22 lb/ft (32.7 kg/m). Area 6.49 in² (4,187 mm²); strong-axis Ix = 199 in⁴ (8,283 cm⁴), Sx = 29 in³ (475.2 cm³), Zx = 33.2 in³ (544.1 cm³).

dDepth
348.0 mm13.7 in13.7 in348.0 mm
bfFlange width
127.0 mm5 in5 in127.0 mm
twWeb thickness
5.8 mm0.23 in0.23 in5.8 mm
tfFlange thickness
8.5 mm0.335 in0.335 in8.5 mm

Drawing

127.0 mm5 in348.0 mm13.7 intf 8.5 mmtf 0.335 intw 5.8 mmtw 0.23 ink 18.7 mmk 0.735 in
Drawn to scale · Dimensions in mmDimensions in inches

W14×22 specifications

dDepth13.7 in348.0 mm
bfFlange width5 in127.0 mm
twWeb thickness0.23 in5.8 mm
tfFlange thickness0.335 in8.5 mm
kDesign value0.735 in18.7 mm
kDetailing value1 1/16 in27.0 mm
k1Detailing value3/4 in19.0 mm
WWeight22 lb/ft32.7 kg/m
AArea6.49 in²4,187 mm²
IxMoment of inertia, strong axis199 in⁴8,283 cm⁴
ZxPlastic modulus, strong axis33.2 in³544.1 cm³
SxSection modulus, strong axis29 in³475.2 cm³
rxRadius of gyration, strong axis5.54 in140.7 mm
IyMoment of inertia, weak axis7 in⁴291.4 cm⁴
ZyPlastic modulus, weak axis4.39 in³71.9 cm³
SySection modulus, weak axis2.8 in³45.9 cm³
ryRadius of gyration, weak axis1.04 in26.4 mm
JTorsional constant0.208 in⁴8.66 cm⁴
bf/2tfFlange slenderness7.46
h/twWeb slenderness53.3
Metric designationW360×32.9

Also known as

W360×32.9

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.