W14×26 Beam Dimensions & Properties
W Shapes (AISC) · W14: 14 in nominal depth
W14×26 is an AISC wide-flange shape (W14: 14 in nominal depth). It is 13.9 in (353.1 mm) deep with a 5.03 in (127.8 mm) flange, a 0.255 in (6.5 mm) web and a 0.42 in (10.7 mm) flange, and weighs 26 lb/ft (38.7 kg/m). Area 7.69 in² (4,961 mm²); strong-axis Ix = 245 in⁴ (10,197.7 cm⁴), Sx = 35.3 in³ (578.5 cm³), Zx = 40.2 in³ (658.8 cm³).
- dDepth
- 353.1 mm13.9 in13.9 in353.1 mm
- bfFlange width
- 127.8 mm5.03 in5.03 in127.8 mm
- twWeb thickness
- 6.5 mm0.255 in0.255 in6.5 mm
- tfFlange thickness
- 10.7 mm0.42 in0.42 in10.7 mm
Drawing
W14×26 specifications
| dDepth | 13.9 in353.1 mm |
|---|---|
| bfFlange width | 5.03 in127.8 mm |
| twWeb thickness | 0.255 in6.5 mm |
| tfFlange thickness | 0.42 in10.7 mm |
| kDesign value | 0.82 in20.8 mm |
| kDetailing value | 1 1/8 in28.6 mm |
| k1Detailing value | 3/4 in19.0 mm |
| WWeight | 26 lb/ft38.7 kg/m |
| AArea | 7.69 in²4,961 mm² |
| IxMoment of inertia, strong axis | 245 in⁴10,197.7 cm⁴ |
| ZxPlastic modulus, strong axis | 40.2 in³658.8 cm³ |
| SxSection modulus, strong axis | 35.3 in³578.5 cm³ |
| rxRadius of gyration, strong axis | 5.65 in143.5 mm |
| IyMoment of inertia, weak axis | 8.91 in⁴370.9 cm⁴ |
| ZyPlastic modulus, weak axis | 5.54 in³90.8 cm³ |
| SySection modulus, weak axis | 3.55 in³58.2 cm³ |
| ryRadius of gyration, weak axis | 1.08 in27.4 mm |
| JTorsional constant | 0.358 in⁴14.9 cm⁴ |
| bf/2tfFlange slenderness | 5.98 |
| h/twWeb slenderness | 48.1 |
| Metric designation | W360×39 |
Also known as
W360×39
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.