W12×22 Beam Dimensions & Properties
W Shapes (AISC) · W12: 12 in nominal depth
W12×22 is an AISC wide-flange shape (W12: 12 in nominal depth). It is 12.3 in (312.4 mm) deep with a 4.03 in (102.4 mm) flange, a 0.26 in (6.6 mm) web and a 0.425 in (10.8 mm) flange, and weighs 22 lb/ft (32.7 kg/m). Area 6.48 in² (4,181 mm²); strong-axis Ix = 156 in⁴ (6,493.2 cm⁴), Sx = 25.4 in³ (416.2 cm³), Zx = 29.3 in³ (480.1 cm³).
- dDepth
- 312.4 mm12.3 in12.3 in312.4 mm
- bfFlange width
- 102.4 mm4.03 in4.03 in102.4 mm
- twWeb thickness
- 6.6 mm0.26 in0.26 in6.6 mm
- tfFlange thickness
- 10.8 mm0.425 in0.425 in10.8 mm
Drawing
W12×22 specifications
| dDepth | 12.3 in312.4 mm |
|---|---|
| bfFlange width | 4.03 in102.4 mm |
| twWeb thickness | 0.26 in6.6 mm |
| tfFlange thickness | 0.425 in10.8 mm |
| kDesign value | 0.725 in18.4 mm |
| kDetailing value | 15/16 in23.8 mm |
| k1Detailing value | 5/8 in15.9 mm |
| WWeight | 22 lb/ft32.7 kg/m |
| AArea | 6.48 in²4,181 mm² |
| IxMoment of inertia, strong axis | 156 in⁴6,493.2 cm⁴ |
| ZxPlastic modulus, strong axis | 29.3 in³480.1 cm³ |
| SxSection modulus, strong axis | 25.4 in³416.2 cm³ |
| rxRadius of gyration, strong axis | 4.91 in124.7 mm |
| IyMoment of inertia, weak axis | 4.66 in⁴194 cm⁴ |
| ZyPlastic modulus, weak axis | 3.66 in³60 cm³ |
| SySection modulus, weak axis | 2.31 in³37.9 cm³ |
| ryRadius of gyration, weak axis | 0.85 in21.5 mm |
| JTorsional constant | 0.293 in⁴12.2 cm⁴ |
| bf/2tfFlange slenderness | 4.74 |
| h/twWeb slenderness | 41.8 |
| Metric designation | W310×32.7 |
Also known as
W310×32.7
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.