W10×22 Beam Dimensions & Properties
W Shapes (AISC) · W10: 10 in nominal depth
W10×22 is an AISC wide-flange shape (W10: 10 in nominal depth). It is 10.2 in (259.1 mm) deep with a 5.75 in (146.0 mm) flange, a 0.24 in (6.1 mm) web and a 0.36 in (9.1 mm) flange, and weighs 22 lb/ft (32.7 kg/m). Area 6.49 in² (4,187 mm²); strong-axis Ix = 118 in⁴ (4,911.5 cm⁴), Sx = 23.2 in³ (380.2 cm³), Zx = 26 in³ (426.1 cm³).
- dDepth
- 259.1 mm10.2 in10.2 in259.1 mm
- bfFlange width
- 146.0 mm5.75 in5.75 in146.0 mm
- twWeb thickness
- 6.1 mm0.24 in0.24 in6.1 mm
- tfFlange thickness
- 9.1 mm0.36 in0.36 in9.1 mm
Drawing
W10×22 specifications
| dDepth | 10.2 in259.1 mm |
|---|---|
| bfFlange width | 5.75 in146.0 mm |
| twWeb thickness | 0.24 in6.1 mm |
| tfFlange thickness | 0.36 in9.1 mm |
| kDesign value | 0.66 in16.8 mm |
| kDetailing value | 15/16 in23.8 mm |
| k1Detailing value | 5/8 in15.9 mm |
| WWeight | 22 lb/ft32.7 kg/m |
| AArea | 6.49 in²4,187 mm² |
| IxMoment of inertia, strong axis | 118 in⁴4,911.5 cm⁴ |
| ZxPlastic modulus, strong axis | 26 in³426.1 cm³ |
| SxSection modulus, strong axis | 23.2 in³380.2 cm³ |
| rxRadius of gyration, strong axis | 4.27 in108.5 mm |
| IyMoment of inertia, weak axis | 11.4 in⁴474.5 cm⁴ |
| ZyPlastic modulus, weak axis | 6.1 in³100 cm³ |
| SySection modulus, weak axis | 3.97 in³65.1 cm³ |
| ryRadius of gyration, weak axis | 1.33 in33.8 mm |
| JTorsional constant | 0.239 in⁴9.95 cm⁴ |
| bf/2tfFlange slenderness | 7.99 |
| h/twWeb slenderness | 36.9 |
| Metric designation | W250×32.7 |
Also known as
W250×32.7
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.