W18×71 Beam Dimensions & Properties

W Shapes (AISC) · W18: 18 in nominal depth

W18×71 is an AISC wide-flange shape (W18: 18 in nominal depth). It is 18.5 in (469.9 mm) deep with a 7.64 in (194.1 mm) flange, a 0.495 in (12.6 mm) web and a 0.81 in (20.6 mm) flange, and weighs 71 lb/ft (105.7 kg/m). Area 20.9 in² (13,484 mm²); strong-axis Ix = 1,170 in⁴ (48,699.1 cm⁴), Sx = 127 in³ (2,081.2 cm³), Zx = 146 in³ (2,392.5 cm³).

dDepth
469.9 mm18.5 in18.5 in469.9 mm
bfFlange width
194.1 mm7.64 in7.64 in194.1 mm
twWeb thickness
12.6 mm0.495 in0.495 in12.6 mm
tfFlange thickness
20.6 mm0.81 in0.81 in20.6 mm

Drawing

194.1 mm7.64 in469.9 mm18.5 intf 20.6 mmtf 0.81 intw 12.6 mmtw 0.495 ink 30.7 mmk 1.21 in
Drawn to scale · Dimensions in mmDimensions in inches

W18×71 specifications

dDepth18.5 in469.9 mm
bfFlange width7.64 in194.1 mm
twWeb thickness0.495 in12.6 mm
tfFlange thickness0.81 in20.6 mm
kDesign value1.21 in30.7 mm
kDetailing value1 1/2 in38.1 mm
k1Detailing value7/8 in22.2 mm
WWeight71 lb/ft105.7 kg/m
AArea20.9 in²13,484 mm²
IxMoment of inertia, strong axis1,170 in⁴48,699.1 cm⁴
ZxPlastic modulus, strong axis146 in³2,392.5 cm³
SxSection modulus, strong axis127 in³2,081.2 cm³
rxRadius of gyration, strong axis7.5 in190.5 mm
IyMoment of inertia, weak axis60.3 in⁴2,509.9 cm⁴
ZyPlastic modulus, weak axis24.7 in³404.8 cm³
SySection modulus, weak axis15.8 in³258.9 cm³
ryRadius of gyration, weak axis1.7 in43.2 mm
JTorsional constant3.49 in⁴145.26 cm⁴
bf/2tfFlange slenderness4.71
h/twWeb slenderness32.4
Metric designationW460×106

Also known as

W460×106

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.