W21×73 Beam Dimensions & Properties
W Shapes (AISC) · W21: 21 in nominal depth
W21×73 is an AISC wide-flange shape (W21: 21 in nominal depth). It is 21.2 in (538.5 mm) deep with a 8.3 in (210.8 mm) flange, a 0.455 in (11.6 mm) web and a 0.74 in (18.8 mm) flange, and weighs 73 lb/ft (108.6 kg/m). Area 21.5 in² (13,871 mm²); strong-axis Ix = 1,600 in⁴ (66,597 cm⁴), Sx = 151 in³ (2,474.4 cm³), Zx = 172 in³ (2,818.6 cm³).
- dDepth
- 538.5 mm21.2 in21.2 in538.5 mm
- bfFlange width
- 210.8 mm8.3 in8.3 in210.8 mm
- twWeb thickness
- 11.6 mm0.455 in0.455 in11.6 mm
- tfFlange thickness
- 18.8 mm0.74 in0.74 in18.8 mm
Drawing
W21×73 specifications
| dDepth | 21.2 in538.5 mm |
|---|---|
| bfFlange width | 8.3 in210.8 mm |
| twWeb thickness | 0.455 in11.6 mm |
| tfFlange thickness | 0.74 in18.8 mm |
| kDesign value | 1.24 in31.5 mm |
| kDetailing value | 1 7/16 in36.5 mm |
| k1Detailing value | 7/8 in22.2 mm |
| WWeight | 73 lb/ft108.6 kg/m |
| AArea | 21.5 in²13,871 mm² |
| IxMoment of inertia, strong axis | 1,600 in⁴66,597 cm⁴ |
| ZxPlastic modulus, strong axis | 172 in³2,818.6 cm³ |
| SxSection modulus, strong axis | 151 in³2,474.4 cm³ |
| rxRadius of gyration, strong axis | 8.64 in219.5 mm |
| IyMoment of inertia, weak axis | 70.6 in⁴2,938.6 cm⁴ |
| ZyPlastic modulus, weak axis | 26.6 in³435.9 cm³ |
| SySection modulus, weak axis | 17 in³278.6 cm³ |
| ryRadius of gyration, weak axis | 1.81 in46.0 mm |
| JTorsional constant | 3.02 in⁴125.7 cm⁴ |
| bf/2tfFlange slenderness | 5.6 |
| h/twWeb slenderness | 41.2 |
| Metric designation | W530×109 |
Also known as
W530×109
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.