W18×65 Beam Dimensions & Properties
W Shapes (AISC) · W18: 18 in nominal depth
W18×65 is an AISC wide-flange shape (W18: 18 in nominal depth). It is 18.4 in (467.4 mm) deep with a 7.59 in (192.8 mm) flange, a 0.45 in (11.4 mm) web and a 0.75 in (19.0 mm) flange, and weighs 65 lb/ft (96.7 kg/m). Area 19.1 in² (12,323 mm²); strong-axis Ix = 1,070 in⁴ (44,536.8 cm⁴), Sx = 117 in³ (1,917.3 cm³), Zx = 133 in³ (2,179.5 cm³).
- dDepth
- 467.4 mm18.4 in18.4 in467.4 mm
- bfFlange width
- 192.8 mm7.59 in7.59 in192.8 mm
- twWeb thickness
- 11.4 mm0.45 in0.45 in11.4 mm
- tfFlange thickness
- 19.0 mm0.75 in0.75 in19.0 mm
Drawing
W18×65 specifications
| dDepth | 18.4 in467.4 mm |
|---|---|
| bfFlange width | 7.59 in192.8 mm |
| twWeb thickness | 0.45 in11.4 mm |
| tfFlange thickness | 0.75 in19.0 mm |
| kDesign value | 1.15 in29.2 mm |
| kDetailing value | 1 7/16 in36.5 mm |
| k1Detailing value | 7/8 in22.2 mm |
| WWeight | 65 lb/ft96.7 kg/m |
| AArea | 19.1 in²12,323 mm² |
| IxMoment of inertia, strong axis | 1,070 in⁴44,536.8 cm⁴ |
| ZxPlastic modulus, strong axis | 133 in³2,179.5 cm³ |
| SxSection modulus, strong axis | 117 in³1,917.3 cm³ |
| rxRadius of gyration, strong axis | 7.49 in190.2 mm |
| IyMoment of inertia, weak axis | 54.8 in⁴2,280.9 cm⁴ |
| ZyPlastic modulus, weak axis | 22.5 in³368.7 cm³ |
| SySection modulus, weak axis | 14.4 in³236 cm³ |
| ryRadius of gyration, weak axis | 1.69 in42.9 mm |
| JTorsional constant | 2.73 in⁴113.63 cm⁴ |
| bf/2tfFlange slenderness | 5.06 |
| h/twWeb slenderness | 35.7 |
| Metric designation | W460×97 |
Also known as
W460×97
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.