W12×72 Beam Dimensions & Properties

W Shapes (AISC) · W12: 12 in nominal depth

W12×72 is an AISC wide-flange shape (W12: 12 in nominal depth). It is 12.3 in (312.4 mm) deep with a 12 in (304.8 mm) flange, a 0.43 in (10.9 mm) web and a 0.67 in (17.0 mm) flange, and weighs 72 lb/ft (107.1 kg/m). Area 21.1 in² (13,613 mm²); strong-axis Ix = 597 in⁴ (24,849 cm⁴), Sx = 97.4 in³ (1,596.1 cm³), Zx = 108 in³ (1,769.8 cm³).

dDepth
312.4 mm12.3 in12.3 in312.4 mm
bfFlange width
304.8 mm12 in12 in304.8 mm
twWeb thickness
10.9 mm0.43 in0.43 in10.9 mm
tfFlange thickness
17.0 mm0.67 in0.67 in17.0 mm

Drawing

304.8 mm12 in312.4 mm12.3 intf 17.0 mmtf 0.67 intw 10.9 mmtw 0.43 ink 32.3 mmk 1.27 in
Drawn to scale · Dimensions in mmDimensions in inches

W12×72 specifications

dDepth12.3 in312.4 mm
bfFlange width12 in304.8 mm
twWeb thickness0.43 in10.9 mm
tfFlange thickness0.67 in17.0 mm
kDesign value1.27 in32.3 mm
kDetailing value1 9/16 in39.7 mm
k1Detailing value1 1/16 in27.0 mm
WWeight72 lb/ft107.1 kg/m
AArea21.1 in²13,613 mm²
IxMoment of inertia, strong axis597 in⁴24,849 cm⁴
ZxPlastic modulus, strong axis108 in³1,769.8 cm³
SxSection modulus, strong axis97.4 in³1,596.1 cm³
rxRadius of gyration, strong axis5.31 in134.9 mm
IyMoment of inertia, weak axis195 in⁴8,116.5 cm⁴
ZyPlastic modulus, weak axis49.2 in³806.2 cm³
SySection modulus, weak axis32.4 in³530.9 cm³
ryRadius of gyration, weak axis3.04 in77.2 mm
JTorsional constant2.93 in⁴121.96 cm⁴
bf/2tfFlange slenderness8.99
h/twWeb slenderness22.6
Metric designationW310×107

Also known as

W310×107

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.