W36×395 Beam Dimensions & Properties
W Shapes (AISC) · W36: 36 in nominal depth
W36×395 is an AISC wide-flange shape (W36: 36 in nominal depth). It is 38.4 in (975.4 mm) deep with a 16.8 in (426.7 mm) flange, a 1.22 in (31.0 mm) web and a 2.2 in (55.9 mm) flange, and weighs 395 lb/ft (587.8 kg/m). Area 116 in² (74,839 mm²); strong-axis Ix = 28,500 in⁴ (1,186,259.6 cm⁴), Sx = 1,490 in³ (24,416.7 cm³), Zx = 1,710 in³ (28,021.9 cm³).
- dDepth
- 975.4 mm38.4 in38.4 in975.4 mm
- bfFlange width
- 426.7 mm16.8 in16.8 in426.7 mm
- twWeb thickness
- 31.0 mm1.22 in1.22 in31.0 mm
- tfFlange thickness
- 55.9 mm2.2 in2.2 in55.9 mm
Drawing
W36×395 specifications
| dDepth | 38.4 in975.4 mm |
|---|---|
| bfFlange width | 16.8 in426.7 mm |
| twWeb thickness | 1.22 in31.0 mm |
| tfFlange thickness | 2.2 in55.9 mm |
| kDesign value | 3.15 in80.0 mm |
| kDetailing value | 3 7/16 in87.3 mm |
| k1Detailing value | 1 13/16 in46.0 mm |
| WWeight | 395 lb/ft587.8 kg/m |
| AArea | 116 in²74,839 mm² |
| IxMoment of inertia, strong axis | 28,500 in⁴1,186,259.6 cm⁴ |
| ZxPlastic modulus, strong axis | 1,710 in³28,021.9 cm³ |
| SxSection modulus, strong axis | 1,490 in³24,416.7 cm³ |
| rxRadius of gyration, strong axis | 15.7 in398.8 mm |
| IyMoment of inertia, weak axis | 1,750 in⁴72,840.5 cm⁴ |
| ZyPlastic modulus, weak axis | 325 in³5,325.8 cm³ |
| SySection modulus, weak axis | 208 in³3,408.5 cm³ |
| ryRadius of gyration, weak axis | 3.88 in98.6 mm |
| JTorsional constant | 142 in⁴5,910.49 cm⁴ |
| bf/2tfFlange slenderness | 3.83 |
| h/twWeb slenderness | 26.3 |
| Metric designation | W920×588 |
Also known as
W920×588
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.