W40×397 Beam Dimensions & Properties

W Shapes (AISC) · W40: 40 in nominal depth

W40×397 is an AISC wide-flange shape (W40: 40 in nominal depth). It is 41 in (1041.4 mm) deep with a 16.1 in (408.9 mm) flange, a 1.22 in (31.0 mm) web and a 2.2 in (55.9 mm) flange, and weighs 397 lb/ft (590.8 kg/m). Area 117 in² (75,484 mm²); strong-axis Ix = 32,000 in⁴ (1,331,940.6 cm⁴), Sx = 1,560 in³ (25,563.8 cm³), Zx = 1,800 in³ (29,496.7 cm³).

dDepth
1041.4 mm41 in41 in1041.4 mm
bfFlange width
408.9 mm16.1 in16.1 in408.9 mm
twWeb thickness
31.0 mm1.22 in1.22 in31.0 mm
tfFlange thickness
55.9 mm2.2 in2.2 in55.9 mm

Drawing

408.9 mm16.1 in1041.4 mm41 intf 55.9 mmtf 2.2 intw 31.0 mmtw 1.22 ink 85.9 mmk 3.38 in
Drawn to scale · Dimensions in mmDimensions in inches

W40×397 specifications

dDepth41 in1041.4 mm
bfFlange width16.1 in408.9 mm
twWeb thickness1.22 in31.0 mm
tfFlange thickness2.2 in55.9 mm
kDesign value3.38 in85.9 mm
kDetailing value3 1/2 in88.9 mm
k1Detailing value1 13/16 in46.0 mm
WWeight397 lb/ft590.8 kg/m
AArea117 in²75,484 mm²
IxMoment of inertia, strong axis32,000 in⁴1,331,940.6 cm⁴
ZxPlastic modulus, strong axis1,800 in³29,496.7 cm³
SxSection modulus, strong axis1,560 in³25,563.8 cm³
rxRadius of gyration, strong axis16.6 in421.6 mm
IyMoment of inertia, weak axis1,540 in⁴64,099.6 cm⁴
ZyPlastic modulus, weak axis300 in³4,916.1 cm³
SySection modulus, weak axis191 in³3,129.9 cm³
ryRadius of gyration, weak axis3.64 in92.5 mm
JTorsional constant142 in⁴5,910.49 cm⁴
bf/2tfFlange slenderness3.66
h/twWeb slenderness28
Metric designationW1000×591

Also known as

W1000×591

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.