W44×408 Beam Dimensions & Properties
W Shapes (AISC) · W44: 44 in nominal depth
W44×408 is an AISC wide-flange shape (W44: 44 in nominal depth). It is 44.8 in (1137.9 mm) deep with a 16.1 in (408.9 mm) flange, a 1.22 in (31.0 mm) web and a 2.17 in (55.1 mm) flange, and weighs 408 lb/ft (607.2 kg/m). Area 120 in² (77,419 mm²); strong-axis Ix = 38,700 in⁴ (1,610,815.6 cm⁴), Sx = 1,730 in³ (28,349.6 cm³), Zx = 2,000 in³ (32,774.1 cm³).
- dDepth
- 1137.9 mm44.8 in44.8 in1137.9 mm
- bfFlange width
- 408.9 mm16.1 in16.1 in408.9 mm
- twWeb thickness
- 31.0 mm1.22 in1.22 in31.0 mm
- tfFlange thickness
- 55.1 mm2.17 in2.17 in55.1 mm
Drawing
W44×408 specifications
| dDepth | 44.8 in1137.9 mm |
|---|---|
| bfFlange width | 16.1 in408.9 mm |
| twWeb thickness | 1.22 in31.0 mm |
| tfFlange thickness | 2.17 in55.1 mm |
| kDesign value | 2.96 in75.2 mm |
| kDetailing value | 3 3/8 in85.7 mm |
| k1Detailing value | 1 13/16 in46.0 mm |
| WWeight | 408 lb/ft607.2 kg/m |
| AArea | 120 in²77,419 mm² |
| IxMoment of inertia, strong axis | 38,700 in⁴1,610,815.6 cm⁴ |
| ZxPlastic modulus, strong axis | 2,000 in³32,774.1 cm³ |
| SxSection modulus, strong axis | 1,730 in³28,349.6 cm³ |
| rxRadius of gyration, strong axis | 18 in457.2 mm |
| IyMoment of inertia, weak axis | 1,520 in⁴63,267.2 cm⁴ |
| ZyPlastic modulus, weak axis | 297 in³4,867 cm³ |
| SySection modulus, weak axis | 189 in³3,097.2 cm³ |
| ryRadius of gyration, weak axis | 3.56 in90.4 mm |
| JTorsional constant | 134 in⁴5,577.5 cm⁴ |
| bf/2tfFlange slenderness | 3.71 |
| h/twWeb slenderness | 31.9 |
| Metric designation | W1100×607 |
Also known as
W1100×607
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.