W40×392 Beam Dimensions & Properties
W Shapes (AISC) · W40: 40 in nominal depth
W40×392 is an AISC wide-flange shape (W40: 40 in nominal depth). It is 41.6 in (1056.6 mm) deep with a 12.4 in (315.0 mm) flange, a 1.42 in (36.1 mm) web and a 2.52 in (64.0 mm) flange, and weighs 392 lb/ft (583.4 kg/m). Area 116 in² (74,839 mm²); strong-axis Ix = 29,900 in⁴ (1,244,532 cm⁴), Sx = 1,440 in³ (23,597.4 cm³), Zx = 1,710 in³ (28,021.9 cm³).
- dDepth
- 1056.6 mm41.6 in41.6 in1056.6 mm
- bfFlange width
- 315.0 mm12.4 in12.4 in315.0 mm
- twWeb thickness
- 36.1 mm1.42 in1.42 in36.1 mm
- tfFlange thickness
- 64.0 mm2.52 in2.52 in64.0 mm
Drawing
W40×392 specifications
| dDepth | 41.6 in1056.6 mm |
|---|---|
| bfFlange width | 12.4 in315.0 mm |
| twWeb thickness | 1.42 in36.1 mm |
| tfFlange thickness | 2.52 in64.0 mm |
| kDesign value | 3.7 in94.0 mm |
| kDetailing value | 3 13/16 in96.8 mm |
| k1Detailing value | 1 15/16 in49.2 mm |
| WWeight | 392 lb/ft583.4 kg/m |
| AArea | 116 in²74,839 mm² |
| IxMoment of inertia, strong axis | 29,900 in⁴1,244,532 cm⁴ |
| ZxPlastic modulus, strong axis | 1,710 in³28,021.9 cm³ |
| SxSection modulus, strong axis | 1,440 in³23,597.4 cm³ |
| rxRadius of gyration, strong axis | 16.1 in408.9 mm |
| IyMoment of inertia, weak axis | 803 in⁴33,423.4 cm⁴ |
| ZyPlastic modulus, weak axis | 212 in³3,474.1 cm³ |
| SySection modulus, weak axis | 130 in³2,130.3 cm³ |
| ryRadius of gyration, weak axis | 2.64 in67.1 mm |
| JTorsional constant | 172 in⁴7,159.18 cm⁴ |
| bf/2tfFlange slenderness | 2.45 |
| h/twWeb slenderness | 24.1 |
| Metric designation | W1000×584 |
Also known as
W1000×584
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.