W44×368 Beam Dimensions & Properties
W Shapes (AISC) · W44: 44 in nominal depth
W44×368 is an AISC wide-flange shape (W44: 44 in nominal depth). It is 44.4 in (1127.8 mm) deep with a 16 in (406.4 mm) flange, a 1.1 in (27.9 mm) web and a 1.97 in (50.0 mm) flange, and weighs 368 lb/ft (547.6 kg/m). Area 108 in² (69,677 mm²); strong-axis Ix = 34,700 in⁴ (1,444,323 cm⁴), Sx = 1,560 in³ (25,563.8 cm³), Zx = 1,800 in³ (29,496.7 cm³).
- dDepth
- 1127.8 mm44.4 in44.4 in1127.8 mm
- bfFlange width
- 406.4 mm16 in16 in406.4 mm
- twWeb thickness
- 27.9 mm1.1 in1.1 in27.9 mm
- tfFlange thickness
- 50.0 mm1.97 in1.97 in50.0 mm
Drawing
W44×368 specifications
| dDepth | 44.4 in1127.8 mm |
|---|---|
| bfFlange width | 16 in406.4 mm |
| twWeb thickness | 1.1 in27.9 mm |
| tfFlange thickness | 1.97 in50.0 mm |
| kDesign value | 2.76 in70.1 mm |
| kDetailing value | 3 3/16 in81.0 mm |
| k1Detailing value | 1 3/4 in44.4 mm |
| WWeight | 368 lb/ft547.6 kg/m |
| AArea | 108 in²69,677 mm² |
| IxMoment of inertia, strong axis | 34,700 in⁴1,444,323 cm⁴ |
| ZxPlastic modulus, strong axis | 1,800 in³29,496.7 cm³ |
| SxSection modulus, strong axis | 1,560 in³25,563.8 cm³ |
| rxRadius of gyration, strong axis | 17.9 in454.7 mm |
| IyMoment of inertia, weak axis | 1,350 in⁴56,191.2 cm⁴ |
| ZyPlastic modulus, weak axis | 265 in³4,342.6 cm³ |
| SySection modulus, weak axis | 169 in³2,769.4 cm³ |
| ryRadius of gyration, weak axis | 3.54 in89.9 mm |
| JTorsional constant | 100 in⁴4,162.31 cm⁴ |
| bf/2tfFlange slenderness | 4.06 |
| h/twWeb slenderness | 35.4 |
| Metric designation | W1100×548 |
Also known as
W1100×548
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.