Hex Nut Size Chart (Inch, ASME B18.2.2)
An inch hex nut is about 7/8 of the bolt diameter thick, and its wrench size usually matches the bolt head, except at 7/16 in and 9/16 in, where the nut is one size larger (11/16 in and 7/8 in). Jam nuts are thinner, heavy hex nuts one wrench size larger.
Size chartTap a size for its drawing and full specs
| Size | FWidth across flatsmmin | GWidth across cornersmmin | HThickness, hex nutmmin | Thickness, jam nutmmin | Across flats, heavy hex nutmmin | Thickness, heavy hex nutmmin | nCoarse thread (UNC)mmTPI | nFine thread (UNF)mmTPI |
|---|---|---|---|---|---|---|---|---|
| 1/4" | 11.17/16 | 12.830.505 | 5.567/32 | 3.975/32 | 12.71/2 | 5.9515/64 | 1.27020 | 0.90728 |
| 5/16" | 12.71/2 | 14.660.577 | 6.7517/64 | 4.763/16 | 14.39/16 | 7.5419/64 | 1.41118 | 1.05824 |
| 3/8" | 14.39/16 | 16.510.650 | 8.3321/64 | 5.567/32 | 17.511/16 | 9.1323/64 | 1.58816 | 1.05824 |
| 7/16" | 17.511/16 | 20.170.794 | 9.523/8 | 6.351/4 | 19.03/4 | 10.7227/64 | 1.81414 | 1.27020 |
| 1/2" | 19.03/4 | 22.000.866 | 11.117/16 | 7.945/16 | 22.27/8 | 12.3031/64 | 1.95413 | 1.27020 |
| 9/16" | 22.27/8 | 25.651.010 | 12.3031/64 | 7.945/16 | 23.815/16 | 13.8935/64 | 2.11712 | 1.41118 |
| 5/8" | 23.815/16 | 27.511.083 | 13.8935/64 | 9.523/8 | 27.01 1/16 | 15.4839/64 | 2.30911 | 1.41118 |
| 3/4" | 28.61 1/8 | 32.991.299 | 16.2741/64 | 10.7227/64 | 31.81 1/4 | 18.6547/64 | 2.54010 | 1.58816 |
| 7/8" | 33.31 5/16 | 38.511.516 | 19.053/4 | 12.3031/64 | 36.51 7/16 | 21.8355/64 | 2.8229 | 1.81414 |
| 1" | 38.11 1/2 | 43.991.732 | 21.8355/64 | 13.8935/64 | 41.31 5/8 | 25.0063/64 | 3.1758 | 2.11712 |
| 1-1/8" | 42.91 11/16 | 49.501.949 | 24.6131/32 | 15.4839/64 | 46.01 13/16 | 28.181 7/64 | 3.6297 | 2.11712 |
| 1-1/4" | 47.61 7/8 | 54.992.165 | 26.991 1/16 | 18.2623/32 | 50.82 | 30.961 7/32 | 3.6297 | 2.11712 |
| 1-3/8" | 52.42 1/16 | 60.502.382 | 29.771 11/64 | 19.8425/32 | 55.62 3/16 | 34.131 11/32 | 4.2336 | 2.11712 |
| 1-1/2" | 57.22 1/4 | 65.992.598 | 32.541 9/32 | 21.4327/32 | 60.32 3/8 | 37.311 15/32 | 4.2336 | 2.11712 |
No exact match. The nearest sizes:
Hex, jam or heavy hex?
The finished hex nut is the standard nut for Grade 2, 5 and 8 bolts. The jam nut has the same wrench size but is roughly 60 % as thick; it locks a full nut (jammed against it) or adjusts where full strength is not needed. The heavy hex nut is thicker and one wrench size wider; it goes with heavy hex structural bolts and ASTM A194 2H nuts on B7 studs.
All sizes are basic (nominal) values: F is the wrench size, G the maximum width across corners, H the thickness. The same nut body is used for UNC and UNF threads.
Thread pitch does not change the nut body: a 3/8-16 and a 3/8-24 nut have the same 9/16 in hex and thickness. Check the pitch with a thread gauge or a known bolt before mixing nuts from different bins.
About Inch Hex Nuts
ASME B18.2.2 covers inch nuts. For most sizes, nut and bolt head share a wrench: a 1/2 in bolt and nut both take 3/4 in. The exceptions are 7/16 in (head 5/8, nut 11/16) and 9/16 in (head 13/16, nut 7/8), a long-standing quirk of the standard.
Jam nuts carry less load than full nuts. When two nuts lock each other, the thin jam nut goes underneath against the part and the full nut on top, because the outer nut carries the load once the pair is tightened. In practice, many people fit them the other way round.
For locking nuts with nylon inserts, the inch sizes follow the same wrench sizes; for metric see nylon lock nuts.
Questions
What size wrench for a 1/4-20 nut?
7/16 in. A 5/16 in nut takes 1/2 in, 3/8 in takes 9/16 in, 7/16 in takes 11/16 in, 1/2 in takes 3/4 in, 5/8 in takes 15/16 in.
How thick is a 1/2 inch nut?
7/16 in (0.438 in) for a finished hex nut, 5/16 in for a jam nut and 31/64 in for a heavy hex nut.
Is a 3/8 nut the same wrench size as a 3/8 bolt?
Yes, both 9/16 in. Only 7/16 in and 9/16 in nuts differ from their bolt heads.
What is a heavy hex nut?
A thicker nut one wrench size wider than the standard hex nut, usually 1/8 in wider (1/2 in: 7/8 in instead of 3/4 in), 1/16 in at 1/4, 5/16, 7/16 and 9/16 in. It is used with heavy hex structural and high-strength bolts.
Sources
- ASME B18.2.2: Nuts for general applications: machine screw nuts, hex, square, hex flange and coupling nuts (inch series)
- AFT Fasteners: Hex jam nuts and finished hex nuts, ASME B18.2.2 dimensions
- AmesWeb: Hex nut and heavy hex nut dimension tables (ASME B18.2.2)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.