Acorn, Coupling, Square and T-Slot Nut Dimensions
Four special nuts you meet in hardware stores and machine shops, each with its own DIN standard: domed acorn nuts that cover the bolt end, long coupling nuts that join two threaded rods, square nuts for slots and channels, and T-slot nuts for machine tables. An M8 acorn nut is 13 mm across and 15 mm high; an M8 coupling nut is 24 mm long.
Size chartTap a nut for its drawing and full specs
| Nut | dThreadmmin | sWrench size / sidemmin | hHeight or length (max)mmin | aT-slot widthmmin | eBase width (T-nut)mmin | kBase height (T-nut)mmin |
|---|---|---|---|---|---|---|
| Acorn (domed cap) nuts, DIN 1587 | ||||||
| M4 Acorn | 40.157 | 70.276 | 80.315 | — | — | — |
| M5 Acorn | 50.197 | 80.315 | 100.394 | — | — | — |
| M6 Acorn | 60.236 | 100.394 | 120.472 | — | — | — |
| M8 Acorn | 80.315 | 130.512 | 150.591 | — | — | — |
| M10 Acorn | 100.394 | 160.630 | 180.709 | — | — | — |
| M12 Acorn | 120.472 | 180.709 | 220.866 | — | — | — |
| M16 Acorn | 160.630 | 240.945 | 281.102 | — | — | — |
| M20 Acorn | 200.787 | 301.181 | 341.339 | — | — | — |
| M24 Acorn | 240.945 | 361.417 | 421.654 | — | — | — |
| Coupling nuts, length 3d, DIN 6334 | ||||||
| M5 Coupling | 50.197 | 80.315 | 150.591 | — | — | — |
| M6 Coupling | 60.236 | 100.394 | 180.709 | — | — | — |
| M8 Coupling | 80.315 | 130.512 | 240.945 | — | — | — |
| M10 Coupling | 100.394 | 170.669 | 301.181 | — | — | — |
| M12 Coupling | 120.472 | 190.748 | 361.417 | — | — | — |
| M16 Coupling | 160.630 | 240.945 | 481.890 | — | — | — |
| M20 Coupling | 200.787 | 301.181 | 602.362 | — | — | — |
| M24 Coupling | 240.945 | 361.417 | 722.835 | — | — | — |
| Square nuts, DIN 557 | ||||||
| M5 Square | 50.197 | 80.315 | 40.157 | — | — | — |
| M6 Square | 60.236 | 100.394 | 50.197 | — | — | — |
| M8 Square | 80.315 | 130.512 | 6.50.256 | — | — | — |
| M10 Square | 100.394 | 170.669 | 80.315 | — | — | — |
| M12 Square | 120.472 | 190.748 | 100.394 | — | — | — |
| M16 Square | 160.630 | 240.945 | 130.512 | — | — | — |
| T-slot nuts, DIN 508 | ||||||
| T-Slot 8 (M6) | 60.236 | — | 100.394 | 80.315 | 130.512 | 60.236 |
| T-Slot 10 (M8) | 80.315 | — | 120.472 | 100.394 | 150.591 | 60.236 |
| T-Slot 12 (M10) | 100.394 | — | 140.551 | 120.472 | 180.709 | 70.276 |
| T-Slot 14 (M12) | 120.472 | — | 160.630 | 140.551 | 220.866 | 80.315 |
| T-Slot 18 (M16) | 160.630 | — | 200.787 | 180.709 | 281.102 | 100.394 |
| T-Slot 22 (M20) | 200.787 | — | 281.102 | 220.866 | 351.378 | 140.551 |
No exact match. The nearest sizes:
What the columns mean for each nut
Acorn nuts: s is the wrench size, h the total height including the dome. The thread is blind, so the bolt must not protrude more than the thread depth (roughly the height of the hexagon part).
Coupling nuts: s is the wrench size, h the overall length (three times the thread diameter in DIN 6334). Many coupling nuts have a small sight hole in the middle to check that both rods are engaged equally.
Square nuts: s is the side of the square, h the thickness. T-slot nuts: a is the T-slot width the nut fits (DIN 650 machine-table slots), e the width and length of the square base, h the total height and k the height of the base that sits in the wide part of the slot. The narrow neck slides in the slot opening.
About Special Nuts
These nuts solve specific problems. Acorn nuts protect the thread end and look finished on furniture, railings and exposed bolts. Coupling nuts extend threaded rod in hangers and jigs. Square nuts do not turn in a square slot or a channel and give a larger bearing face than a hex nut of the same thread. DIN 508 T-slot nuts clamp work and fixtures on milling machine and drill press tables.
Wrench sizes follow the DIN series for coupling and square nuts (M10 17 mm, M12 19 mm). The current DIN 1587 uses the ISO sizes for M10 (16 mm) and M12 (18 mm); older acorn nuts with 17 mm and 19 mm hexes are still common.
Wing nuts (DIN 315) and thin square nuts (DIN 562) are not listed: their dimensions vary between editions and makers more than we can confirm. Measure the part, or take the maker's drawing.
T-slot nut and slot size
The nut must match the slot width a of the table, not the bolt: a 14 mm slot takes an M12 T-nut, an 18 mm slot an M16. Clamping kits are sold by slot width and stud thread (for example '14 mm slot, M12 studs'). Aluminium profile T-nuts (for 30 or 40 mm profiles) are a different system with smaller, thinner nuts.
Questions
What size is an M8 acorn nut?
13 mm across flats and 15 mm high to DIN 1587. M6 is 10 mm and 12 mm, M10 16 mm (older: 17 mm) and 18 mm.
How long is an M10 coupling nut?
30 mm (3 × d) to DIN 6334, with a 17 mm hex. M8 is 24 mm long, M12 36 mm.
Which T-nut fits a 14 mm T-slot?
A DIN 508 T-nut for 14 mm slots, normally with an M12 thread: 22 mm square base, 16 mm high.
What is a square nut used for?
In square holes, slots and channels where a hex nut would turn, and in sheet-metal and woodwork where the larger bearing face helps.
Sources
- DIN 1587:2016, Hexagon domed cap nuts, high type
- Westfield Fasteners: DIN 1587 domed nut dimensions
- DIN 6334: Hexagon nuts, length 3 d (coupling nuts)
- DIN 557: Square nuts, product grade C; CDE Fasteners DIN 557 sheet
- DIN 508: Nuts for T-slots; OPAC DIN 508 table
- Halder: Nuts for T-slots DIN 508
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.