Hex Flange Nut Sizes (EN 1661, DIN 6923)
A hex flange nut has a built-in washer, usually with a serrated face that bites into the part. Height equals the thread diameter: an M8 flange nut is 8 mm high, 13 mm across flats with a 17.9 mm flange. The one trap: M10 is 16 mm across flats in EN 1661 but 15 mm in the old DIN 6923.
Size chartTap a size for its drawing and full specs
| Thread | PPitchmmin | sWidth across flatsmmin | Wrench size DIN 6923 (if different)mmin | dcFlange diameter (max)mmin | mHeight incl. flange (max)mmin |
|---|---|---|---|---|---|
| M5 | 0.80.0315 | 80.315 | — | 11.80.465 | 50.197 |
| M6 | 10.0394 | 100.394 | — | 14.20.559 | 60.236 |
| M8 | 1.250.0492 | 130.512 | — | 17.90.705 | 80.315 |
| M10 | 1.50.0591 | 160.630 | 150.591 | 21.80.858 | 100.394 |
| M12 | 1.750.0689 | 180.709 | — | 261.024 | 120.472 |
| M14 | 20.0787 | 210.827 | — | 29.91.177 | 140.551 |
| M16 | 20.0787 | 240.945 | — | 34.51.358 | 160.630 |
| M20 | 2.50.0984 | 301.181 | — | 42.81.685 | 200.787 |
No exact match. The nearest sizes:
How to read the chart
s is the wrench size of EN 1661, dc the flange diameter and m the overall height including the flange. All are maximum values; m equals the nominal thread diameter in every size.
Serrated flange nuts (often called whiz nuts) lock by digging into the surface. They are effective against vibration on steel parts but damage paint and coatings, and they need a bearing surface softer than the serrations. On aluminium, painted parts or slotted holes, use the plain-face version or a nyloc nut with a washer.
Pair flange nuts with flange bolts of the same standard so both take the same wrench.
About Flange Nuts
EN 1661 replaced DIN 6923 with essentially the same nut. The flange diameter and height did not change; only the M10 wrench size went from 15 mm to 16 mm, and the fine-thread sizes were dropped. Both versions are still sold, so an M10 flange nut may need either socket.
Property classes are 8 and 10 for steel and A2-70 / A4-70 for stainless. ISO 4161 is the ISO standard for the same part and uses the same main dimensions.
Because the flange spreads the load, flange nuts are often used without a washer in slotted holes, sheet metal and automotive assemblies. For maximum resistance to loosening, the bolt length should give at least one full thread beyond the nut.
Questions
What size socket for an M8 flange nut?
13 mm. M5 takes 8 mm, M6 10 mm, M10 16 mm (15 mm for DIN 6923), M12 18 mm, M16 24 mm.
What is the flange diameter of an M6 flange nut?
14.2 mm maximum, with a 6 mm height and 10 mm wrench size.
Is DIN 6923 the same as EN 1661?
Yes, except for the M10 wrench size (15 mm in DIN 6923, 16 mm in EN 1661) and the dropped fine-thread sizes.
Do serrated flange nuts need a washer?
No. A washer would defeat the serrations. Use the plain-face version if you need a washer or must protect the surface.
Sources
- EN 1661:1997, Hexagon nuts with flange
- Würth: Hexagon nut with flange EN 1661 / DIN 6923, product data and standard change notes
- Böllhoff: DIN 6923 stainless A4 data sheet
- McMaster-Carr: DIN 6923 nuts
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.