W10×17 Beam Dimensions & Properties

W Shapes (AISC) · W10: 10 in nominal depth

W10×17 is an AISC wide-flange shape (W10: 10 in nominal depth). It is 10.1 in (256.5 mm) deep with a 4.01 in (101.9 mm) flange, a 0.24 in (6.1 mm) web and a 0.33 in (8.4 mm) flange, and weighs 17 lb/ft (25.3 kg/m). Area 4.99 in² (3,219 mm²); strong-axis Ix = 81.9 in⁴ (3,408.9 cm⁴), Sx = 16.2 in³ (265.5 cm³), Zx = 18.7 in³ (306.4 cm³).

dDepth
256.5 mm10.1 in10.1 in256.5 mm
bfFlange width
101.9 mm4.01 in4.01 in101.9 mm
twWeb thickness
6.1 mm0.24 in0.24 in6.1 mm
tfFlange thickness
8.4 mm0.33 in0.33 in8.4 mm

Drawing

101.9 mm4.01 in256.5 mm10.1 intf 8.4 mmtf 0.33 intw 6.1 mmtw 0.24 ink 16.0 mmk 0.63 in
Drawn to scale · Dimensions in mmDimensions in inches

W10×17 specifications

dDepth10.1 in256.5 mm
bfFlange width4.01 in101.9 mm
twWeb thickness0.24 in6.1 mm
tfFlange thickness0.33 in8.4 mm
kDesign value0.63 in16.0 mm
kDetailing value7/8 in22.2 mm
k1Detailing value9/16 in14.3 mm
WWeight17 lb/ft25.3 kg/m
AArea4.99 in²3,219 mm²
IxMoment of inertia, strong axis81.9 in⁴3,408.9 cm⁴
ZxPlastic modulus, strong axis18.7 in³306.4 cm³
SxSection modulus, strong axis16.2 in³265.5 cm³
rxRadius of gyration, strong axis4.05 in102.9 mm
IyMoment of inertia, weak axis3.56 in⁴148.2 cm⁴
ZyPlastic modulus, weak axis2.8 in³45.9 cm³
SySection modulus, weak axis1.78 in³29.2 cm³
ryRadius of gyration, weak axis0.85 in21.5 mm
JTorsional constant0.156 in⁴6.49 cm⁴
bf/2tfFlange slenderness6.08
h/twWeb slenderness36.9
Metric designationW250×25.3

Also known as

W250×25.3

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.