W5×16 Beam Dimensions & Properties

W Shapes (AISC) · W5: 5 in nominal depth

W5×16 is an AISC wide-flange shape (W5: 5 in nominal depth). It is 5.01 in (127.3 mm) deep with a 5 in (127.0 mm) flange, a 0.24 in (6.1 mm) web and a 0.36 in (9.1 mm) flange, and weighs 16 lb/ft (23.8 kg/m). Area 4.71 in² (3,039 mm²); strong-axis Ix = 21.4 in⁴ (890.7 cm⁴), Sx = 8.55 in³ (140.1 cm³), Zx = 9.63 in³ (157.8 cm³).

dDepth
127.3 mm5.01 in5.01 in127.3 mm
bfFlange width
127.0 mm5 in5 in127.0 mm
twWeb thickness
6.1 mm0.24 in0.24 in6.1 mm
tfFlange thickness
9.1 mm0.36 in0.36 in9.1 mm

Drawing

127.0 mm5 in127.3 mm5.01 intf 9.1 mmtf 0.36 intw 6.1 mmtw 0.24 ink 16.8 mmk 0.66 in
Drawn to scale · Dimensions in mmDimensions in inches

W5×16 specifications

dDepth5.01 in127.3 mm
bfFlange width5 in127.0 mm
twWeb thickness0.24 in6.1 mm
tfFlange thickness0.36 in9.1 mm
kDesign value0.66 in16.8 mm
kDetailing value3/4 in19.0 mm
k1Detailing value7/16 in11.1 mm
WWeight16 lb/ft23.8 kg/m
AArea4.71 in²3,039 mm²
IxMoment of inertia, strong axis21.4 in⁴890.7 cm⁴
ZxPlastic modulus, strong axis9.63 in³157.8 cm³
SxSection modulus, strong axis8.55 in³140.1 cm³
rxRadius of gyration, strong axis2.13 in54.1 mm
IyMoment of inertia, weak axis7.51 in⁴312.6 cm⁴
ZyPlastic modulus, weak axis4.58 in³75.1 cm³
SySection modulus, weak axis3 in³49.2 cm³
ryRadius of gyration, weak axis1.26 in32.0 mm
JTorsional constant0.192 in⁴7.99 cm⁴
bf/2tfFlange slenderness6.94
h/twWeb slenderness15.4
Metric designationW130×23.8

Also known as

W130×23.8

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.