W12×16 Beam Dimensions & Properties
W Shapes (AISC) · W12: 12 in nominal depth
W12×16 is an AISC wide-flange shape (W12: 12 in nominal depth). It is 12 in (304.8 mm) deep with a 3.99 in (101.3 mm) flange, a 0.22 in (5.6 mm) web and a 0.265 in (6.7 mm) flange, and weighs 16 lb/ft (23.8 kg/m). Area 4.71 in² (3,039 mm²); strong-axis Ix = 103 in⁴ (4,287.2 cm⁴), Sx = 17.1 in³ (280.2 cm³), Zx = 20.1 in³ (329.4 cm³).
- dDepth
- 304.8 mm12 in12 in304.8 mm
- bfFlange width
- 101.3 mm3.99 in3.99 in101.3 mm
- twWeb thickness
- 5.6 mm0.22 in0.22 in5.6 mm
- tfFlange thickness
- 6.7 mm0.265 in0.265 in6.7 mm
Drawing
W12×16 specifications
| dDepth | 12 in304.8 mm |
|---|---|
| bfFlange width | 3.99 in101.3 mm |
| twWeb thickness | 0.22 in5.6 mm |
| tfFlange thickness | 0.265 in6.7 mm |
| kDesign value | 0.565 in14.4 mm |
| kDetailing value | 13/16 in20.6 mm |
| k1Detailing value | 9/16 in14.3 mm |
| WWeight | 16 lb/ft23.8 kg/m |
| AArea | 4.71 in²3,039 mm² |
| IxMoment of inertia, strong axis | 103 in⁴4,287.2 cm⁴ |
| ZxPlastic modulus, strong axis | 20.1 in³329.4 cm³ |
| SxSection modulus, strong axis | 17.1 in³280.2 cm³ |
| rxRadius of gyration, strong axis | 4.67 in118.6 mm |
| IyMoment of inertia, weak axis | 2.82 in⁴117.4 cm⁴ |
| ZyPlastic modulus, weak axis | 2.26 in³37 cm³ |
| SySection modulus, weak axis | 1.41 in³23.1 cm³ |
| ryRadius of gyration, weak axis | 0.77 in19.6 mm |
| JTorsional constant | 0.103 in⁴4.29 cm⁴ |
| bf/2tfFlange slenderness | 7.53 |
| h/twWeb slenderness | 49.4 |
| Metric designation | W310×23.8 |
Also known as
W310×23.8
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.